Electronics Forum | Sat Oct 21 17:41:05 EDT 2023 | basil_rv
Hi all! While operating the JUKI JX-350LED, error E600016 (Since the Z-axis is descending, it cannot operate) appeared. During initialization, this error appears, although all heads are raised. Rebooting and turning off the heads did not help. Wha
Electronics Forum | Mon Mar 15 15:54:35 EDT 2021 | ephan
When I turn on the machine it would get stuck on this message.
Electronics Forum | Fri Mar 12 19:32:41 EST 2021 | ephan
The machine was working fine but one day it showed up with the message "fail to start up mc system" then reboot. Does anyone know how to fix this?
Electronics Forum | Mon Mar 15 05:53:06 EDT 2021 | cosimaliu
hi i am cosima,we have engineer to support can you take a running video showing the problem we may give you some advice to slove this problem.
Electronics Forum | Tue Mar 16 03:20:39 EDT 2021 | cosimaliu
please try to Replace the image card of IP-X5 and confirm whether the problem is solved. cosima@qy-smt.com
Electronics Forum | Tue Aug 02 18:38:14 EDT 2022 | klauss
when i use only one nozzle to mounting 3535 cree power leds, it works good but when i use 2 or more nozzles, leds are getting rotated or upturned just after the nozzle relaese the led. it's like nozzle throws the led not mounts. But not all the led
Electronics Forum | Wed May 06 23:46:31 EDT 1998 | Thomas Nisbet
We want to insert LED's on .100 center's with a UIC Rad 2. The LED must have plastic standoff on the leads before they are inserted. Are there any tape & reel machines that will put the standoff on the LED and then put the component on tape & Reel. A
Electronics Forum | Mon Jun 01 12:31:35 EDT 1998 | Don Spicer
| We want to insert LED's on .100 center's | with a UIC Rad 2. The LED must have plastic | standoff on the leads before they are inserted. | Are there any tape & reel machines that will | put the standoff on the LED and then put the component | on ta
Electronics Forum | Tue Nov 15 19:31:54 EST 2005 | eeltec
>I/OPERATION ==> >1/RUNNING ==> but any command that I try gives an E100 error and in the left side of the monitor a square with: Conditions Initialized Waiting Emg stop (in red) org incmp (in red) Interlock (in red) data comp Use Vac
Electronics Forum | Thu Oct 29 07:56:45 EDT 2009 | jeffreyj
Thanks for the reply, Sr.Tech. Sure, I'm considering all of the things you've mentioned. It certainly seems that service and spare parts are easy to obtain for the Quads, which is the main reason I am even considering the dinosaurs (that and they ca
