Electronics Forum | Mon Oct 10 07:40:33 EDT 2005 | pjc
To make an "L" you use a 90 deg turn unit, a.k.a. "diverter" conveyor, then connect to a straight or linking conveyor. Go to this link to see turn unit: http://www.flexlink.com/wps/public/s/10000/c/29667
Electronics Forum | Tue Mar 14 03:57:43 EST 2006 | Base
Hey Peter, Did some simple math... 800.000PCB's x 20cmp = 1.6million placements 8hrs/day * 22 days/month = 176 hrs You're looking at over 90kCph fulltime! I'd say go with an AX-5 as JAX suggested. Given the product you described you could reach s
Electronics Forum | Wed Mar 08 23:40:43 EST 2006 | fastek
If......... 1) Assuming you are panelizing them (you would have to actually).... 2) You don't have any fine pitch parts on the board then I would suggest a chipshooter like a Fuji CP-6 or a Panasonic MV2F. Get (2) of these used for around $100K ea
Electronics Forum | Tue Mar 14 04:25:20 EST 2006 | Rob
I wouldn't go with the AX-5 - it's overkill. To make a board in high volume that sounds that simple is a job for a second user chipshooter (Fuji or Pana)as the first reply mentioned. Stay away from FCM1's. I'm sure the AX-5 is a great machine, but
Electronics Forum | Thu Oct 23 11:42:25 EDT 2003 | Claude_Couture
Does anyone know the difference between Panasert "Q" type and "K" type feeders? If you have pictures that would be even better.
Electronics Forum | Sat Oct 25 19:02:45 EDT 2003 | Gabriele
Main difference is the reel holder position and for sure the clamping pin location. Tape feeding system is different. Any way they cannot be compatible among them. Q type feeders must be used for MV Q-Type placer and K-type feeders must be used for M
Electronics Forum | Fri Oct 24 18:38:50 EDT 2003 | fastek
Claude- I'll send you the answer you need in an e-mail. Rick
Electronics Forum | Sun Apr 18 14:14:43 EDT 1999 | Ben Kirk
| Please visit our Web site, especially 'link page', to get some hint for roll typr of cleaning wiper for automatic screen printers. http://www.squeegee.co.kr | Its Dumb stunts like this that is running this site for everyone. Spend a few dollars a
Electronics Forum | Mon Sep 30 04:27:40 EDT 2013 | grahamcooper22
I am not sure what the IPC spec is suggesting....K type thermocouples are normally specified upto 1250 C, of course there is a tolerance in their accuracy and this probably degrades after hundreds of uses through a reflow oven, but normally the accur
Electronics Forum | Sun Sep 29 13:04:58 EDT 2013 | KIC-Tech Service
Sr. Tech, As far as I’m aware, most if not all, manufactures of thermal profilers offer K type thermocouples as a standard for profiling in the electronics manufacturing industry. In my decades of experience in the reflow and wave solder industry, t
.png)
