Electronics Forum | Mon Oct 04 10:24:51 EDT 2010 | jdumont
Anyone have any experience with them? Looking for a 1 or .5 meter conveyor and possibly a loader. Good prices for new equip, wondering if there is a reason why?
Electronics Forum | Fri Mar 24 08:10:12 EST 2006 | mapell
Hi AR Nice job on the chain/rail cleaning. I would contact Speedline Electrovert tech support, 800.737.8110 to assist in trouble shooting. They can walk you through using a meter to measure input and output current to the SC card and make sure tha
Electronics Forum | Tue Nov 02 15:57:20 EDT 2010 | g2garyg2
Anyone have any experience with them? Looking > for a 1 or .5 meter conveyor and possibly a > loader. Good prices for new equip, wondering if > there is a reason why? PROMATION has the best price on new 1M and 600 mm conveyors. They are often
Electronics Forum | Mon Jan 15 15:18:13 EST 2007 | jaimebc
We have an oMniflow 7 as well, and looking at the calibration procedure, it indicates that turning the pots ( total of 5 pots. 4 on the lower board and one on the upper board )fully counter-clockwise is the FIRST step of a series of tests. Then you w
Electronics Forum | Tue Sep 01 10:55:41 EDT 2015 | emeto
Hi, 1. Take a multi meter and measure the voltage - I assume it is a DC motor(probably 24V). If you don't, check power supply,cable, relays and Driver for the motor. If you do have voltage, check sensors(sometimes sensor activated may stop your con
Electronics Forum | Mon Apr 22 14:06:25 EDT 2019 | kgarlapa
Yes it is a Kanetic edge belt conveyor that was manufactured by Kanetic in Lake Barrington Illinois. I tried holding the reset/start button and also tried to cycle the power after after holding the reset button, No Luck.Do you know if Kanetic is sti
Electronics Forum | Wed Apr 17 08:01:42 EDT 2019 | jfeustel
If this is a Kanetic edge belt conveyor that was manufactured by Kanetic in Lake Barrington Illinois then I've seen this before. The folks at Kanetic built a function into the PLC code to make the conveyor reversible without hardware modifications.
Electronics Forum | Fri Aug 25 08:12:16 EDT 2006 | davef
Leading conveyor manufacturers are ATI, Conveyor Technology, Crown Simplimatic, Dynapace, Flextek, Fuji, Jot, Kanetic, Panasonic, and Process Control.
Electronics Forum | Fri Apr 12 08:44:25 EDT 2019 | kgarlapa
HELLO GUY, We are using kanetic conveyor 13inch size. The conveyor belt moves reverse direction when pcb comes. what could be the problem? Regards,
Electronics Forum | Fri Apr 12 08:51:12 EDT 2019 | kgarlapa
We are using kanetic conveyor 13inch size. The conveyor belt moves reverse direction when pcb comes. what could be the problem?
