Electronics Forum | Fri Jan 16 07:48:29 EST 2004 | Mika
We usually program the components in the component database with pin 1 in the lower left corner. Then in the feeder database we set the component orientaion to 270 deg for Tray feeders(turn the tray in the feeder 180 deg) and "tube" feeders. For tape
Electronics Forum | Tue Jun 11 11:25:57 EDT 2019 | don_julio
> If the board is just not reaching the temps you > need, you could place them in an oven to > "preheat" them. When I was building a > rather thick board with a copper core I had to do > this. Since we were only doing sma
Electronics Forum | Tue Jul 07 04:06:59 EDT 2009 | smt99
I have never used Jedec trays before, what type of tape do you use to keep them together once stacked for packaging? Thanks all
Electronics Forum | Thu May 10 13:53:36 EDT 2001 | stefwitt
If you get the price for the tray and holder from Siemens you will follow Dave's recommendation. To get the 0 point for the tray ( from where you measure the first pick position )you set up the tray on the 7th track ( type 51 ). After you sent the da
Electronics Forum | Mon Jul 07 09:00:50 EDT 2008 | josh_brubaker
These images are of two melted matrix trays, full of BGA components, which were left to bake in an oven over the weekend. The oven temperature controller was not checked after a recent power failure and reached a temperature of 715�F. The two trays m
Electronics Forum | Wed Jun 19 00:07:10 EDT 2002 | kenbliss
arzucom, have you considered using trays to handle your boards in process and your handbuilds. This method is fast becoming the industry standard method for a large variety of reasons, specifically ESD as when the boards are in the tray your people
Electronics Forum | Wed Jun 19 00:07:31 EDT 2002 | kenbliss
arzucom, have you considered using trays to handle your boards in process and your handbuilds. This method is fast becoming the industry standard method for a large variety of reasons, specifically ESD as when the boards are in the tray your people
Electronics Forum | Tue May 02 01:55:13 EDT 2000 | Erhard Hofmann
You are right, I am looking for a solution to place small components, 0603, 0805, 0402, and similar. The components will be fed by a vibratory feeder and placed onto trays. This is happening in the comp manufacturing stage and the trays are used as a
Electronics Forum | Tue Apr 11 06:35:12 EDT 2017 | proy
We have received partial trays from Mouser where they put foam over the tray taped tightly, but THIS IS NOT GOOG ENOUGH they must include TWO trays to keep the parts captive and safe. Just went through this with a customer supplied kit, and have star
Electronics Forum | Fri Aug 19 15:46:49 EDT 2005 | Claude_Couture
Three strikes and they are fired! Most effective method to keep them awake
