Electronics Forum | Mon Nov 12 14:16:27 EST 2007 | sueph
Sorry, should have said the type of flux we use. It's Kester 186 RMA flux. Does that make a difference?
Electronics Forum | Mon Jul 26 16:31:02 EDT 2004 | Sue PH
We use Kester 186 flux and the STU people would sometimes find white residue after cleaning with Isopropyl at the solder station. We have Lenium (Petroferm)in our vapor degreasers, and now they use Lenium at their stations as well as final clean, an
Electronics Forum | Tue Sep 04 19:25:03 EDT 2007 | sueph
We just got new boards in that have ENIG pads. In the past we had a problem with too much gold getting into the wave solder pot from large connectors getting tinned at the wave. Do we have to worry about too much gold getting into the pot with this
Electronics Forum | Mon Mar 25 21:45:22 EDT 2024 | buckeye
I got an inquiry from one of our electronics labs with regards to their soldering processes. They use eutectic (63% Sn, 37% Pb) solder. For liquid flux they are currently using Kester 186, which is an old-school, full rosin (RMA and ROL1) flux that c
Electronics Forum | Tue Feb 19 14:00:55 EST 2002 | global
We have had some discussions about what causes parts to lift out of the holes when going over the wave on our flow solder machine. The machine being used is a Treiber (700 series). There are two bottom pre-heaters and one top pre-heater. We try to pr
Electronics Forum | Tue Dec 28 10:57:53 EST 1999 | Amy Castor
I have tried the water soluble flux and the aqueous cleaners but I got the same results you did; horrible corrosion and a white flaky mess. I know exactly what you're talking about. We do a lot of hand soldering around here, and the magical solutio
Electronics Forum | Wed Jul 21 17:49:52 EDT 2004 | jsk
problem: Too many solvents and boards are not clean Flux remains on the board after vapor degreaser and "Powdery" white residue after vapor degreasing Flux type is kester 186 Process: hand solder High Temp alloy, spot clean after hand solder e
Electronics Forum | Thu Feb 10 17:33:37 EST 2000 | Ivan Rojas
I will just like to know if is ok to build a board with a BGA ,with water soluable paste and washed or is better to use a no clean paste . And one last question , what do you guys think about the better paste Kester or Indium .
| 1 |
