Electronics Forum | Thu Sep 05 23:18:03 EDT 2013 | feiyangniao
There is a new toy I received today: a NeoDen TM-240A automatic desktop pick and place machine! I’ve kept my eyes on this baby for a quite a while, and finally decided to make a purchase last week. The shipping was very fast: DHL from China, a total
Electronics Forum | Fri Aug 23 18:51:00 EDT 2002 | edahi
weve done a few evaluations for the no-flow underfill and for the reliability I think it has already passed MRT L3 @ 220C reflow. What is it specifically you're interested about the flow u/fill??
Electronics Forum | Tue Feb 19 16:19:26 EST 2008 | edatasys
Check out http://www.solderstar.co.uk/wavePro.html This tool measures all key wave solder information with a single pass. Wave/PCB contact, immersion depths, etc. Also has a reflow pack to allow use on reflow, 9 channels with predictive software. B
Electronics Forum | Thu Jul 22 17:39:58 EDT 2021 | proceng1
We do use a company for custom fixtures, but we also make some in house. The biggest hurdle for a board that requires a fixture to go through printing and SMT is that the board has to be the tallest thing. So any hold downs or locating hardware has
Electronics Forum | Mon Mar 03 12:14:33 EST 2003 | testing
I am trying to optimise the use of our Automatic Optical Inspection Machines. As the data we collect from the machine is mainly of the attribute type (Pass/fail, Defect1, Defect2, etc), what advice can you provide to improve its use as well as using
Electronics Forum | Wed May 20 17:56:51 EDT 2009 | dyoungquist
I have attached a pdf showing the dimensions for the QFN we placed. First, The pins on the part are not only on the bottom side but also wrap around to come up each of the 4 sides of the part as shown in the side view in the attached pdf. This i
Electronics Forum | Sun May 23 21:33:42 EDT 2010 | ashley
"The part is picked up and head goes to it's xy location" Hello mickd, I believe VP had passed but machine is confused how to compensate & place. OS error normally associate with a faulty VME card. Please check the following :- VM1152 VM1730 VM193
Electronics Forum | Thu Feb 22 04:00:02 EST 2001 | Scott B
We are increasingly being asked to store components for longer and longer periods which we know through experience leads to reduction or total loss of solderability of the parts. 1) What is the industry accepted shelf life of tin/lead plated compone
Electronics Forum | Tue Sep 23 13:08:26 EDT 2008 | slthomas
Put the new stuff in the back and pull from the front. A pass through from stores makes that a lot easier. Bar codes are a wonderful thing if you can get people to use them. Wand it into stores then wand it sequentially into production via a queue.
Electronics Forum | Mon Jul 12 11:35:27 EDT 2004 | Pierre RICHARD
Here are some answers to my questions after a good research. I also added more definitions that could help understand this esoteric language used in assembly, specially surrounding fluxes and their use. In blue italics are comments and extracts from
