Electronics Forum | Tue Aug 13 20:54:48 EDT 2002 | davef
The major profiler companies [ie, KIC, ECD, etc] give away FREE Excel spread sheets that list everyone's oven and paste and allow you to input board characteristics and then it suggests a profile. Go get one.
Electronics Forum | Wed May 12 08:16:33 EDT 2004 | solderpro
woow, slow down hot rod, hey davef, you are alright by me, good to see some one out there that has hands on experience rather than a theory nut.... any how, you need a top of the line profiler, super gold mole, or Kic.... these truly are the best and
Electronics Forum | Mon May 10 09:30:35 EDT 2004 | davef
Q1: What are the basic requirements of thermal profiling? A1: Not sure what you�re looking for here, but when doing a profile, you�re trying to measure the temperature at specific points of the board, as the board moves through the oven. Q2: How we
Electronics Forum | Mon Mar 21 11:57:08 EST 2005 | lyrtech
Hi, actually, I'm searching for a device to create reflow profiles like DATAPAQ, KIC, MOLE.... because our only one unit is broken... Which one are you using and why? Do you know if someone have a second hand unit to sell?
Electronics Forum | Thu Mar 24 12:33:01 EST 2005 | Dreamsniper
I used KIC before now I'm using MOLE. I recommend KIC. regards,
Electronics Forum | Tue Mar 22 06:08:45 EST 2005 | Grant
Hi, We used to manually profile by comparing logged temp numbers and matching the paste profile. But we got a KIC and it's software was so much better we got a good reduction in rework and we have almost no first run faults now. I would recommend on
Electronics Forum | Fri Jun 10 12:11:49 EDT 2005 | chunks
QS and ISO can really play a part here. If so, the best way I found was to run parallel T-couple ports to the thermocouples of the oven. Now you can run a board and gather all your thermal information and set your temps. Now use parallel ports to
Electronics Forum | Wed Apr 19 11:54:32 EDT 2000 | Rudolf Niebling
You need a KIC profiler whitch is able to find optimal profiles for your boards. The KIC works very well with the Heller ovens. With the KIC is also possible to find one good profile for different boards. Get in contact with KIC +1-858-673-6050
Electronics Forum | Thu Jan 10 06:52:51 EST 2002 | Dreamsniper
I'm using Kic Profiler and aluminium tape from Kic and thermocouples from Kic. They are good and reliable. I even manage to modify my heller 1088 by adjusting the fix conveyor and re-baffling the oven. Had dropped my 20-22 deg. C delta T down to 4.3
Electronics Forum | Thu Feb 24 15:14:48 EST 2022 | joshsvoboda
The thermocouples were attached with a square of aluminum tape holding the probe to the part joint. Kapton tape was used to secure the aluminum tape to the board surrounding but not covering the probe. We are using a X5 KIC profiler with the 2G sof
