Electronics Forum | Fri Mar 17 12:00:52 EDT 2023 | previnmoore
Its the kiss 103 selective solder machine. The end of the travel, it's the x axis. when i tried jogging it nothing happens just makes a noise. Thanks for responding.
Electronics Forum | Fri Mar 17 14:59:50 EDT 2023 | proceng1
OK, does your axis screw have the flex coupler or the magnetic coupler? Which axis is it? Did you turn off soft limits? If it's out of range, soft limits won't let it move by controls. I need to know which axis before I can get too far into this. I
Electronics Forum | Thu Apr 21 10:10:44 EDT 2005 | Hiram
Hi all, Does anybody have any comments/experience with a laser selective solder machine? What about Beamworks Spark 100 machine? I appreciate your feedback. Hiram
Electronics Forum | Mon Apr 25 09:22:15 EDT 2005 | Hiram
Thank you all for your comments always helpful. Have a great week! Hiram
Electronics Forum | Mon Apr 25 10:17:22 EDT 2005 | pjc
Here's another supplier: http://www.seicatestsolutions.com/pages/24/A30-Firefly-Solder-Station.php FYI: Contax is a rep firm that sells the MTA system
Electronics Forum | Fri Apr 22 11:27:01 EDT 2005 | ddennison
Go to the following web site: http://www.pro-mation-inc.com/ Contact: Gary Goldberg at 847-812-1289 if you have any questions!
Electronics Forum | Fri Apr 22 14:28:38 EDT 2005 | Gary Goldberg - PROMATION
Low end selective laser soldering systems are limited to what types of soldering can be performed. I have read through the previous comments and find that most have commented on earlier technologies (which do not offer the features today's system do)
Electronics Forum | Mon May 02 09:21:14 EDT 2005 | jeglum
The beamworks new software on teh 100 is great but went to outstanding when the 60 watt leser was installed and the performance went up 60% in speed. The new software requires the temp of the solder for melting and the ammount to be despenced and the
Electronics Forum | Thu Apr 21 10:25:44 EDT 2005 | Fred Saffer
A thorough analysis is in order because laser point-to-point soldering lacks the flexibility of the bottom sided miniwave systems. My experience showed that heating profiles could be grossly affected by color temperature and thermal mass. This can be
Electronics Forum | Fri Apr 22 11:21:42 EDT 2005 | HUH
There are several types of lasers to do laser soldering. Panasonic also has a high intensity light that can solder as well. I've tried em' all and two over whelming things stand out when it comes to this type of soldering. #1 is preheat. It seems
