Electronics Forum | Thu Dec 01 14:48:48 EST 2022 | peterm
Hi, The detailed instructions should be in Voyager under PTF Installation. It's basically a kit where you pick up a metal plate and you teach that component on the belt directly. If you don't have access to the kit I'd just start of with the default
Electronics Forum | Mon Dec 05 09:14:14 EST 2022 | peterm
Invoke. The PTF Setup Procedure dialog box displays. 4. Select Product. The Select Product File dialog box displays. 5. Select the same product used in the Open PTF Teach Product section above. 6. Enter the Slot number for the PTF and select Full
Electronics Forum | Thu Sep 11 17:28:57 EDT 2014 | grsysservice
Dear all, we are company here in Brazil that is looking for a Genesis calibration kit MCCM Calibration kit 45235202,if some one has one to sell we can travel to get it.
Electronics Forum | Tue Feb 06 20:57:44 EST 2001 | Kyle
The Universal GSM is a very accurate and repeatable machine. I have had one for the last 5 years and it is still repeatable to +/- .0015". I use a Robotic Vision Systems glass plate kit to check the repeatability. it has glass slugs and glass boar
Electronics Forum | Wed Oct 10 13:17:27 EDT 2001 | BrianC
Universal now has Big-Board options and retrofits for GSM's. 32" kits and 25" kits. If you call them, they will come. Brian
Electronics Forum | Wed Apr 26 01:59:01 EDT 2023 | ttheis
Thanks, what about the camera calibration? Does it use the same kit as the GSM machines?
Electronics Forum | Wed Feb 02 16:29:43 EST 2011 | remullis
I can explain our kitting process which was heavily software managed. For our Chipshooters we grouped setups of the optimum algorithym for less carriage movement, and grouping part numbers as much as possible. This was done with some high dollar sof
Electronics Forum | Tue May 30 10:17:07 EDT 2000 | g cronin
I thought I saw that there is a retro kit required to supply the proper power to the multi pitch feeders from older machines. Check the Universal web site for info on the multi pitch I think that is where I read about it...
Electronics Forum | Mon Jan 29 11:55:46 EST 2007 | MGC
You might be wise to contact Universal's local office for support and or access to the required kits. http://www4.uic.com/wcms/WCMS2.nsf/index/Contact_Us_53.html#Western
Electronics Forum | Thu Apr 05 09:11:05 EDT 2007 | wrongway
im looking at a universal spec that says there advantis ax72 machine can go up to 25" board length with special kit
