Electronics Forum | Mon Jun 10 14:27:08 EDT 2019 | bane016
Hello, The machine reports the connection lost between the head and the server?Is there any idea what can be? I would try first to solve the problem if I can, before I call support... Thank you, Problem solved! The connector was damaged.... Th
Electronics Forum | Wed Jun 12 14:33:56 EDT 2019 | bane016
In the service has been for a year..The machine works three shifts 24h per day in year...Very fast and precise machine.. and the most important of all it is extremely easy to use and easy to make a new program.Recommendation from me.. Best regards
Electronics Forum | Mon Oct 07 02:55:56 EDT 2019 | kwozniak
Hello everybody, if someone have KY-3020T calibration and maintenance manual instruction in pdf, please send me to my mail wozniak.j@assel.pl Regards
Electronics Forum | Fri May 07 21:31:52 EDT 2021 | sosigguy
Have you checked WinMCS? it's the software in windows that controls the machine. if you open it up it might have thrown some error codes, i believe it has some diagnostics in it aswell.
Electronics Forum | Thu May 13 11:25:02 EDT 2021 | rsikora
Thanks for the replies. MCS is not on our 3030, it probably wasn't available on the 3030 model. The ethernet switch which connects the vision pc and the rtpc was found to be defective. The switch was replaced and the 3030 returned to normal operat
Electronics Forum | Thu Mar 24 23:41:40 EDT 2022 | glasscake
Another oddity, when I unplug the PCI1/2 cables and cycle power I still get the same error.
Electronics Forum | Wed Mar 13 14:00:30 EDT 2024 | carl_p
Out of the list you have given, it would be koh young all day long... No cyber optics? It also depends on what your making of course. Some offer benefits others do not etc..
Electronics Forum | Thu Jun 20 08:59:19 EDT 2024 | linux
No point looking for procedure if you don't have the Jig. I'm not aware of any company that going to give you a calibration jig set.
Electronics Forum | Thu Mar 24 23:34:55 EDT 2022 | glasscake
My Koh Young 3030VAL errors on the homing routine. The "DTool" "MCS" gives me an error "Before homing, X-AAxis already checked negative limit..." "Before Hoking, Y Axis already checked negative limit..." "Please turn off the control-power-switch, an
Electronics Forum | Wed Jan 30 08:50:55 EST 2008 | scotceltic
Best 3D system we purchased and have been running for over a year now is the Koh young. Best Gage R and R, easiest programming, easiest user interface and best defect detection. We used to run an MVP Supra in 3D but had issues with software glitche