Electronics Forum | Fri Mar 26 08:55:45 EDT 2021 | manaik
Hello, We have purchased used Koh Young AOI, the setup does not let us through when you start MCS on start, it says RJ45 connector is out, which is not. delta tau clipper conntroller. The swithc on INIT must be ON or OFF? Do the lights work even wi
Electronics Forum | Sat Mar 30 14:02:48 EDT 2024 | poly
I've bought a used ky 8030 spi that has a software fault. I've got the software restore from Koh Young but i can get any debugging info to see if the hardware works. I assume win mcs is the interface to the hardware but all the debugging options are
Electronics Forum | Tue Apr 16 14:14:34 EDT 2024 | poly
Does anyone have a maintenance or other manual for a ky 8030? I'd love a wiring diagram and any debugging / maintenance info.
Electronics Forum | Mon Apr 22 00:02:39 EDT 2024 | poly
That was handy! I'd love to get a wiring diagram though, mostly because I'm worried that the reason that the machine is not working is because a bit is missing... I've taken a photo of the inside and there's a markings where it looks like a board use
Electronics Forum | Fri Aug 04 10:09:47 EDT 2017 | ks0707
Good morning, I looked one cycle of programming of Koh Young 3D AOI machine first, and will do same thing for JUKI Pick & Place and Mechatronic 2D AOI machine soon. BTW, I found from User manual of Koh Young 3D AOI that it allowed Mento Export file
Electronics Forum | Tue Apr 27 11:53:36 EDT 2021 | dontfeedphils
When I was looking at Mirtec (4-5 years ago) I wasn't very impressed compared to Koh Young. It was easy to tell that Koh Young started with 3D and then added 2d features where needed, and that Mirtec had done the opposite. There's nothing wrong wit
Electronics Forum | Thu Apr 27 05:45:20 EDT 2017 | pavel_murtishev
methos1979, 1. Mirtec, Marantz 2. Koh Young, Orbotech, Mirtec 3. Koh Young Zenith 4. Definitely Programs for 3D AOI are prepared really faster. Having defined component database, programming takes no more than a couple of hours. Fine tuning takes u
Electronics Forum | Fri Oct 05 09:03:36 EDT 2018 | dontfeedphils
Yea, probably need a new board, which may be tricky considering how old these models are getting now. I had a B2 at my last shop and we upgraded to a Koh Young Zenith 3D. At the time, Yestech told us the camera in the B2 would go for around 10k jus
Electronics Forum | Mon Jan 09 16:04:45 EST 2023 | proy
We have a Koh Young 3030 3D SPI machine - this was completely working and we shipped it out to storage, and brought it back. Presently now though - the Machine controller computer which is a Unix machine has a corrupted disk drive. The Windows comp
