Electronics Forum | Fri Jun 27 11:56:37 EDT 2014 | sumote
Colleagues, I have a JT-620L Wavesolder machine (Made by JYI DIANN MACHINE) that experienced a power fluctuation and had the factory programming wiped. If someone would be so kind to read the settings on the (4) VS-606V7 controllers I would be very
Electronics Forum | Tue May 18 07:33:17 EDT 2004 | cyber_wolf
I need to find a way to keep all of the essential hand tools and hardware at our screen printers and placement machines.(Allen keys,allen screws) I have tried labeling small toolboxes and putting the tools and screws in there, but they ALWAYS seem to
Electronics Forum | Tue Apr 27 13:01:03 EDT 2021 | procyon
Looking to repurpose some older 32mm GSM Blue Label feeders for a custom application. These feeders are the 24V type and not 42V. Does anyone have any information on connecting to and communicating with the feeder outside of a GSM machine or setu
Electronics Forum | Fri Jul 26 10:35:20 EDT 2002 | jaimebc
Using white labels on xouts works for us. I prefer to used the machine BBR ( Bad board recognition ) when building multiple arrays with no pattern on xouts. We always run xouts last, therefor, we enable the BBR only to finish the arrays with X on it.
Electronics Forum | Tue Aug 31 11:06:00 EDT 2021 | recard
Hi. I would just like to warn everyone from this chinese fraud company. We bought an used Koh Young Zenith from them which should be in perfect condition and with 6 month warranty. They supplied the machine which of course is not working and was as
Electronics Forum | Fri Sep 12 08:32:44 EDT 2008 | pjc
Its actually a Seica machine. GenRad just labeled it. Teradyne/GenRad no longer supports the system. Go directly to Seica, http://www.seica.com , they are an Italian company with offices around the world. There is one in Nashua NH. Some 3rd party o
Electronics Forum | Fri Sep 24 12:02:57 EDT 2004 | Frank
Yes, I can see your problem, the nozzle makes only good contact in the center and so the ends don't make good contact. The ends tend to curl up during reflow. There were two suggestions to solve this. 1) Let the operator push down the labels befor
Electronics Forum | Mon Sep 08 11:38:52 EDT 2014 | spoiltforchoice
They key requirement before any fancy tools is careful storage, stock control, labeling and handling. If your parts are incorrect before they even get to production, you're screwed. As gregp suggests, to get consistently correct value and orientation
Electronics Forum | Mon Oct 13 15:33:36 EDT 2014 | rgduval
So...today, we were able to get rid of the z axis not mounted error. It looks like we did so by modifying the settings in axes location (matched them to the beam 1 settings). Now, when we try to lower the nozzles, we can hear a relay or switch clic
Electronics Forum | Fri Mar 01 09:10:50 EST 2002 | caldon
Andrew- I look for usefulness in web sites.I hate having news mail sent to my email box. Having a site post technical information, links to useful stuff, and all around beneficial information is good. It seems to me the vogue thing on the Technology
