Electronics Forum | Thu Sep 23 11:28:57 EDT 2004 | Frank
We have placed labels using the Hover-Davis label feeders on our Juki machines and we used standard nozzles. Are your labels an odd shape where a standard nozzle won't work?
Electronics Forum | Thu Sep 23 11:50:54 EDT 2004 | JB
We are using a standard nozzle Once placed, the label is not flat, the ends of the label are slightly lifted on both ends. The label is .650 x .200 Have you guys run into a similar problem?
Electronics Forum | Tue Sep 28 12:44:30 EDT 2004 | JB
You are right, basically our options are down to a custom nozzle. Pushing down the label is not the route that I would go with. Thanks for your input and good to hear that you guys found a way around it.
Electronics Forum | Fri Sep 24 12:02:57 EDT 2004 | Frank
Yes, I can see your problem, the nozzle makes only good contact in the center and so the ends don't make good contact. The ends tend to curl up during reflow. There were two suggestions to solve this. 1) Let the operator push down the labels befor
Electronics Forum | Thu Sep 23 10:28:33 EDT 2004 | JB
We are placing labels using a Hoover-Davis feeder with a GSM. Anybody else out there doing this? My question is: Are you using a special nozzle for this operation?
Electronics Forum | Thu Dec 13 17:31:59 EST 2007 | fredc
One of my customers use Amistar machines. The machine goes in the line and prints labels for each individual board and places the finished label on the board as it goes through. They have several of the machines, so they could have gotten something e
Electronics Forum | Fri Jul 10 08:50:04 EDT 2015 | jax
Is the feeder working properly... presenting the label at the same location each time it indexes? If yes, I would look at changing nozzles on the machine. sometimes a rigid tipped nozzle cannot maintain suction on thin items like labels that can ben
Electronics Forum | Mon Sep 28 11:51:07 EDT 2020 | makersan
Well The feeder can work externally with the adapter. I can't get the label with the nozzle as the yamaha ys12f can't see the feeder. how can I say there is a feeder on yamaha 27th set? Is there anyone who can help with this?
Electronics Forum | Mon Jan 24 13:00:30 EST 2005 | JB
We have a Hoover_Davis label feeder. We use on size label for most of our products so it works well for us. It's a well-built machine. We had some problems with the label in particular, so we had to buy from a different source. It runs great. If you
Electronics Forum | Fri Apr 15 11:52:09 EDT 2005 | vikkaraja
Part is being pre rotated already and I also changed the nozzle size from 15mm to 17.5mm this morning. There is no board warpage at all and production is watching for it while an operator puts on a barcode label.
winsouce.jpg)
