Electronics Forum | Tue Nov 30 15:38:27 EST 1999 | Wendy Casker
Hi, I am looking for land patterns for 0612 and 0508 chip capacitors. Because they are not standard (yet) package sizes, i am having trouble finding a standard land pattern. (If you don't know what these are, picture a 1206 or an 0805 with the te
Electronics Forum | Wed Mar 19 09:54:44 EDT 2008 | davef
Here's what we suggest: * Keep a 5-mm space between a board edge and a ceramic capacitor. * Mount the capacitor parallel relative to the edge. * Design pads about a half of the termination. * Fixture the board when using your pizza cutter.
Electronics Forum | Wed Apr 09 14:50:03 EDT 2008 | bradlanger
We use a FKN pizza cutter and found that even with 5mm clearance and the proper orientation of the part larger ceramic capacitors 1812, 1210 would still stress fracture. We have successfully fixed stress fracture problems by adding routed relief slot
Electronics Forum | Tue Nov 30 21:23:55 EST 1999 | cklau
hello; When we are doing component land pattern design , one thing will always be in our mind; that is the basic criteria or common land pattern design guideline for reflow and flow solder assemblies. For basic fomula in calculating resistors are:
Electronics Forum | Tue Nov 30 17:07:42 EST 1999 | Dave F
Wendy: The IPC-SM-782 Pad Calculator (www.ipc.org/html/fsresources.htm) should be able help you solve your problem. Good luck Dave F
Electronics Forum | Thu Mar 21 21:21:37 EST 2002 | davef
In the beginning, there was TO-5. And it was good. Flushed with success, they created TO-220. It too was good. Then came SMT. It was better than some things, but then again ... In these early days, there was a haze on the horizon that blocked t
Electronics Forum | Thu Jun 22 07:30:25 EDT 2017 | stephendo
Any possibility of having some changes made to the PCB for future runs? Can the ground connections be modified to have thermal relief patterns? At one time occasionally people would come to me to tell me that the power was out at their work station
Electronics Forum | Thu Mar 10 09:13:15 EST 2005 | davef
From http://www.IPC.org ... IPC-7351 - Generic Requirements for Surface Mount Land Pattern and Design Standard The successor to the IPC-SM-782A is here! The document covers land pattern design for all types of passive and active components, includ
Electronics Forum | Wed Mar 02 06:19:03 EST 2005 | pjc
Go to http://www.ipc.org and look up IPC-7351 - Generic Requirements for Surface Mount Land Pattern and Design Standard The successor to the IPC-SM-782A is here! The document covers land pattern design for all types of passive and active components
Electronics Forum | Tue Mar 28 16:23:44 EST 2000 | Michael Parker
While attempting to use the IPC-SM-782, land pattern calculator, I came across the term Component ID. (for example - "C1005") I am not sure what this is. I wanted to verify the IPC recommended land pattern for a Chip Capacitor with 0603 size. Can any