Electronics Forum | Thu Aug 10 05:53:10 EDT 2000 | pascal MATHIEU
hello everybody , i am looking for the elementary caution you need to take when you reflow large board with several thousands of smt components . thank you for your advise
Electronics Forum | Thu Aug 10 21:59:14 EDT 2000 | Dave F
Pascal: Two elementary cautines are: 1 Don't dump the board before the reflowed solder is cooled. 2 Try to manage the side to side temperature variations in your oven. I wouldn't be surprised to see 5�C variation. Good luck
Electronics Forum | Thu Mar 03 09:11:25 EST 2005 | russ
I wouldn't raise the temps just slow the conveyor, You need to get the PCB "soaked in". It seems as if you are applying more thermal energy than the PCB can accept in all areas. Does this oven have convection heating? Hopefully so. I have found t
Electronics Forum | Fri Mar 19 11:40:28 EST 2004 | ccleland
The Multitroniks 2000 series machine was not a Europlacer machine. It was designed and build by Multitroniks as an entry level machine and has a very basic simple design. It has very easy to use software and a very heavy stable platform but quality
Electronics Forum | Tue Aug 15 10:55:23 EDT 2006 | chrisgriffin
Some software versions won't allow a brightness change with the next button. You should do a histogram test. Place a board on the worknest, then a smooth white card on top of that. Then jog the camera over the card. Raise the Z-axis to it's softwa
Electronics Forum | Tue Aug 04 10:43:48 EDT 2009 | kpm135
Thanks for the suggestions! It ended up being that a wire on the amplifier card in the lower drawer came loose and was making intermittent contact. Tightened all the wires down and the problem has gone away. Now we have a new problem. We had to repla
Electronics Forum | Fri Jul 16 11:13:46 EDT 2004 | Inspection Solution
Hi John, If you have any questions on any of the CyberOptics equipment, please feel free to contact http://www.lvtechnologies.com. There is no charge for helping answer any questions. Full service, sales (parts and equipment) and support is also a
Electronics Forum | Mon Feb 22 10:01:01 EST 2010 | jtsyeung
Since the inductor is electro-magnetic, that means the device is composite of coil and ferrite metal. The inductor inside the reflow oven meets with blower motors which close to the inductor and generate magnetic field. With such conditions, Lawren
Electronics Forum | Tue Aug 28 09:53:44 EDT 2001 | Brock
Stefan, I could be wrong but I have a question about every 10th board having a defect. If a machine places 1 million components and a the board has 200 components you arrive at 5000 boards. If every 10th board has a defect, then only 500 boards have
Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon
My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774
