Electronics Forum: large inductor carrier tapes (Page 1 of 1)

LED sticking into carrier tape

Electronics Forum | Tue Aug 01 11:23:56 EDT 2017 | OrHorti

We are using a custom made nozzle, designed for this particular LED. The dome of the LED is also custom made, the diameter of the lens at the base is 2.9mm while the substrate of the package is 3.3mm, so this gives about 0.2mm spacing between lens a

tape and reel vendor

Electronics Forum | Tue Mar 30 10:43:21 EST 2004 | Robert

I could use some help too. I have a bunch of SMD 4 Pads Inductors from Central Technologies. The dimensions of the part is 11.30x13.9x6.9 . I've called four companies already and none were able to find a carrier for this part. These parts are on plas

chip placed upside down

Electronics Forum | Tue Jun 10 17:13:44 EDT 2014 | grauen06

I have seen this on a MyDATA machine and we had to slow our feed rate of the feeder down. That seemed to do the trick. We concluded the carrier tape was too large for the part, but our vendor didn't really seem to care.

Cover tape tearing

Electronics Forum | Fri Dec 16 10:25:14 EST 2005 | GS

Hi Liza - polystirene monolayer (blend ?) could be sealed at less presure, ie 35-40 PSI. Temprature could be 165�-170�C. For sure after sealed you shoud make sure the sealing strength (peel strength)should meet min 15-25 N.(bet avg from 25 to 45 N)

Electrically-Conductive Tapes application advice?

Electronics Forum | Sun Aug 02 19:47:16 EDT 2009 | isd_jwendell

Now that I've seen the pics... Soldering could work just fine. If you are going for large production then you could get copper discs cut and mounted in tape carrier ($$). This would make it very easy for automated equipment to assemble. Mounting a

Re: Wave Solder of SOIC/SOT Packages WHY???

Electronics Forum | Fri Oct 23 04:16:16 EDT 1998 | Tony B

| | My company is looking for higher density for card layout. One suggestion has been locating active components packaged in SOT's and SOIC's on the B-side of the card. This in turn will require wave soldering of the above mentioned components. When

Re: Which SMD placement machines are easiest to use?

Electronics Forum | Thu Jan 27 06:12:14 EST 2000 | Dean

Opeator point of view: 1. eassy to read menues. Organized structure. Large text and use of color to indicate important info status...green=good, yellow= warning, red=fatal etc. Simplicity rules in this realm. GUI are great for operations screens

Re: Hey Guys, you gotta check this out!

Electronics Forum | Mon Apr 26 17:32:32 EDT 1999 | Scott McKee

| Hey Guys! | | Look what I get to try and do this week! I got handed a cardboard box on Friday afternoon with the parts and 20 of these little jewels! That's both sides of the board by the way... | | Whoever laid this out, I'd like to go and do a

  1  

large inductor carrier tapes searches for Companies, Equipment, Machines, Suppliers & Information

PCB Handling Machine with CE

Training online, at your facility, or at one of our worldwide training centers"
Voidless Reflow Soldering

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
High Throughput Reflow Oven

Component Placement 101 Training Course
Win Source Online Electronic parts

Software for SMT placement & AOI - Free Download.
design with ease with Win Source obselete parts and supplies

Private label coffee for your company - your logo & message on each bag!