Electronics Forum | Sun Dec 21 23:30:09 EST 2014 | sarason
Since the Laser alignment bit is attached to the head and you don't have to move the part to a camera location, before placing the component on the board it is about the fastest method there is of getting accurate component alignment. With more moder
Electronics Forum | Fri Dec 19 12:43:01 EST 2014 | emeto
I had some of these before and they do a decent job. Laser alignment is ok for passive components. Compared to vision systems it has mainly disadvantages. If you have bended lead on IC for example, it wouldn;t catch it and it will place the part. I w
Electronics Forum | Thu Dec 18 14:38:58 EST 2014 | rangarajd
Hello, I don't have any experience with Juki. Visited one of their booth recently and I was told they use a laser for alignment. How does this work? Is there any advantage over the traditional vision alignment? Thanks!
Electronics Forum | Wed Jan 09 14:43:28 EST 2019 | SMTA-Andy
Would like to get feedback on realignment of an SMT line with loader/unloader, printer, p&p and 16' oven. What tech would be good to use if doing it ourselves? (Lasers, etc?) What companies can be recommended for a professional job?
Electronics Forum | Fri Aug 07 13:03:53 EDT 2020 | assuredtech
SMT Forum, Does anyone know if the Sanyo laser alignments can be replaced with the Cyberoptics brand? If so is it plug and play or does it require any software or machine configuration changes. Thanks in advance
Electronics Forum | Wed Jul 16 19:38:28 EDT 2014 | garym4569
What is the base cost of an inline pcb etcher? Specs: fiducial alignment, smema interface, 400mm x 400mm marking area. Will be used to mark panel 2d codes, pcb array 2d codes, and human readable. Thanks Gm
Electronics Forum | Mon Apr 12 09:39:38 EDT 2004 | cedams
Ken, Thanks for the feedback. Unfortunately (or fortunately) I am in Mexico and we make our own PCBs. That is another conversation entirely and another of my fix-it projects but currently we drill the PCBs and align the artwork to the holes visually
Electronics Forum | Thu May 26 09:21:37 EDT 2016 | bobpan
Everytime I have seen an offset like that it was dirt on the quad-align lens.....try cleaning it off with alcohol and a lint free cloth. If this does not fix it....you may have dirt inside the quad align itself. I am assuming you have checked to ma
Electronics Forum | Thu May 26 15:13:47 EDT 2016 | bobpan
If there is dust (on the glass) off from the center of the lens it will add it to the part when scanning it and place off. I have ran into this twice.....I fixed it once by breaking the lens on the quad align and blowing it out.....another time I hel
Electronics Forum | Thu May 26 17:45:36 EDT 2016 | stevedc
Thanks for the thoughts. I will try a few things tonight so see if I can clean anything from the windows. As always, thanks for your thoughts and time :) BR, Steve
