Electronics Forum | Fri Aug 22 09:18:38 EDT 2014 | brantco
Hi Everyone i am looking for a copy of Autoprogram i thing version 5.25 maybe i believe the machine i have has 5.11 any help would be very appreciated
Electronics Forum | Sat Jun 03 20:27:39 EDT 2006 | eeltec
Dear MrMaint, I have a COMET machine and I need to calibrate the X axes of table B that it is of by aprox 0.2%. Please help, the manual do not tell how to do this. Best regards, Greg
Electronics Forum | Fri Nov 18 02:42:46 EST 2005 | vinitverma
Greg, I recently faced this problem at a customer though the machine was Topaz X but the problem was same. So I suggest you first check if the GOOD LED is ON on the Servo card down in the MCX box. Also check the same GOOD LED on the System board in
Electronics Forum | Tue Mar 14 04:25:20 EST 2006 | Rob
I wouldn't go with the AX-5 - it's overkill. To make a board in high volume that sounds that simple is a job for a second user chipshooter (Fuji or Pana)as the first reply mentioned. Stay away from FCM1's. I'm sure the AX-5 is a great machine, but
Electronics Forum | Sat Jun 03 01:32:16 EDT 2006 | eeltec
I need to calibrate the X axes of the B table of an Assenbleon COMET machine, Please help me with advice and information
Electronics Forum | Mon Jun 18 01:56:38 EDT 2018 | reckless
PCBSynergy helped me on my 760 especially latest version with Kicad compatibility. It is pretty user friendly and almost self explanatory. Don't forget to leave files names short for the 750.
Electronics Forum | Mon Aug 31 09:16:54 EDT 2020 | aurash
After reading the machine logs it seems that the problem is on the X-axis but the safety mechanism is disabling all the Servos and the Axis system (all axes) are in error state (that's why the error messages are showing on different axes) The JUKI m
Electronics Forum | Tue Jan 10 10:48:10 EST 2017 | snevermind
I have a colleague trying to keep a piece of old equipment alive for a little longer. Web searches haven't been very helpful due to the age of the equipment. The latest listing I found was placed in 2013. Does anyone have a machine that could be p
Electronics Forum | Thu Apr 29 07:06:21 EDT 2004 | Claude_Couture
With the machine off, try to move all axes manually away from any limits, i.e.: away from the end of their course. Some machine can't deal with having axes at limit when you turn them on.
Electronics Forum | Mon Oct 20 14:56:51 EDT 2014 | rgduval
Progress!! Somehow, this morning I was able to get things almost working. I swapped cards 1 and 2 back, and then back again, so, in the same state as my last reply...set the default settings for the axes configuration...then, verified the addresses