Electronics Forum | Wed Feb 23 11:02:41 EST 2000 | John
John, I'll try to take a crack at it. We manufacture our own boards, and have a high mix. We currently have BOTH a Camalot 2800 Dispenser and a DEK 260 Screen printer. We use the camalot for glue applications, and prototype paste. We use the printe
Electronics Forum | Mon Jan 15 11:45:39 EST 2001 | bdoyle
Hi guys, thanks for the feedback! Wolfgang - we're looking into making this forum similar to the old one (displaying messages instead of just threads on the forum homepage). In the meantime have you checked out the feature "While You Were Out" whic
Electronics Forum | Mon Apr 16 10:55:01 EDT 2001 | genny
Happened at my company lots on our older designs. We touched up those pads in house by hand, because the solder joint was very poor. We also did it on SOT 86 pkgs on the gnd pins. When they were touched up, we would get an extra 1/2dB of gain out
Electronics Forum | Mon Jun 18 21:20:17 EDT 2001 | davef
It�s sometimes tough to put enough paste on the board before reflow to obtain half-way adequate hole fill with components on a 0.062 inch thick board. So, a 0.093 incher, um. Yano, a lot is determined by board lay-out and how you jigger your profil
Electronics Forum | Fri Jan 21 05:39:58 EST 2000 | Scott Davies
Hi ZJJ, I know exactly where you're coming from on this one! We have a similar situation here with a SiPlace 80S-15, rated at 15K max per hour. In practice, we achieve about 11K. The reason is fairly straightforward. The quoted maximum placements pe
Electronics Forum | Fri Sep 24 09:57:54 EDT 1999 | Boca
| | Is there a standard rule/guide for the orientation of pcb's in a panel for panelised board (specially for routed panel). | | i often get this question from peeps here and i kept telling them that it depends on how it affects the process. | | than
Electronics Forum | Wed Sep 15 20:24:16 EDT 1999 | Scott Cook
| Is feasible to have an electronic manufacturing company near the beach? How affect the corrosion the electronic components? | Although I agree that Earl would do a fine job setting up your facility, I do believe that it would be more efficient to
Electronics Forum | Thu Sep 16 09:21:45 EDT 1999 | Wolfgang Busko
| | Is feasible to have an electronic manufacturing company near the beach? How affect the corrosion the electronic components? | | | | Although I agree that Earl would do a fine job setting up your facility, I do believe that it would be more effi
Electronics Forum | Fri Feb 19 09:29:38 EST 1999 | Justin Medernach
| What to look for that causes tombstoning and the corective action. | The three biggest causes that I can think of are placement machine component picking inaccuracy, placing inaccuracy, and design design design. If your placement platform is pic
Electronics Forum | Mon Oct 26 20:18:23 EST 1998 | Dave f
| I need some info on how to stop the bridges I'm having on | radial and axial parts that are in the same place on every board. I'm also having problems with sot-25 bridging. I'm using a Electrovert E-pak. I tried leveling the machine,solder pot, an
