Electronics Forum | Thu Mar 29 15:50:35 EST 2001 | tomgervascio
We've think that with seen solder shorts under BGAs after wave soldering the boards. In addition, it seems to be related to a certain soldermask configuration over the topside BGA vias.. THere is one vendor,A, that is applying soldermask after HASL,
Electronics Forum | Wed Aug 04 12:35:15 EDT 1999 | Dave F
| | | | I have been asked to supply a maximum shelf life for our assemblied PCB's. I realise this is dependent on so many factors- temperature, humidity, no of layers etc. But does anyone have a formulae for calculating shelf life, or does anyone kno
Electronics Forum | Tue Apr 19 16:20:05 EDT 2016 | davef
Don't blame it on the poor paste thickness requirement [although I might go on to argue that it's could be a contributor to the issue]. Most likely you're the problem. About 70% of the time solder on gold fingers is caused by poor cleaning of screen
Electronics Forum | Tue Dec 14 17:02:04 EST 1999 | John Thorup
Hello Kris If you do have and OSP coating I'd say Curtis has nailed it. But you seem to have references to gold. Does this board have a standard nickle/gold finish. If so what sort of "solder on gold" problems were you having? Reading between the
Electronics Forum | Fri May 28 16:30:39 EDT 1999 | JohnW
| Yes l know this problem keeps cropping up on the forum but l've missed some of the follow-ups. | | Our problem is that the lifting only occurs on 3% of production so actually detecting an improvement is difficult. We're actually having to inspect
| 1 |
