Electronics Forum: lead and free and profiler (Page 4 of 32)

link to report on lead free soldering and differnet pcb finishes

Electronics Forum | Fri Dec 23 23:29:17 EST 2005 | azbvc

Slaine, thank you for sharing..

Soldering lead free and leaded tin in the mix in one machine

Electronics Forum | Tue Dec 15 14:38:23 EST 2020 | emeto

I have done it different ways on different equipment. 1. Remove alloy one from the machine. Add alloy two only. and use it.For next board, do the same. 2. There are machines with separate sections for PB and PC-Free, so pots are away from each other

Soldering lead free and leaded tin in the mix in one machine

Electronics Forum | Tue Dec 08 12:44:52 EST 2020 | janwillemreusink

Who is using two sorts of tin in one selective soldering machine with to solder pots? So then the soldering program selects the correct pot (tin). What are the risks? Adding wrong tin in the wrong pot. Mixing up the nozzles?

Soldering lead free and leaded tin in the mix in one machine

Electronics Forum | Thu Dec 17 18:24:37 EST 2020 | SMTA-64387520

We use both in our selective soldering machine. Training is the most important concern. As long as you have well trained operators the risk is minimized.

Soldering lead free and leaded tin in the mix in one machine

Electronics Forum | Wed Jan 20 07:11:01 EST 2021 | janwillemreusink

Thanks for replying... Unfortunately (or not) it isn't relevant anymore. Due to the effects of covid-19 we don't have any active aerospace customers anymore so (for now) we're only making leadfree products.

Soldering lead free and leaded tin in the mix in one machine

Electronics Forum | Thu Dec 10 12:12:40 EST 2020 | robl

Yep, done it previously with a multipot machine. Using with wirefeed to top up the pots means you only have a contamintion risk when you fit a new top up reel. Used separate nozzles for both, but theoretically using titanium nozzles would mean no c

link to report on lead free soldering and differnet pcb finishes

Electronics Forum | Fri Dec 23 06:09:04 EST 2005 | Slaine

good report showing lots of sections and compairng differnet pcb finishes http://www.smartgroup.org/experience/experience%20report%202005.pdf

link to report on lead free soldering and differnet pcb finishes

Electronics Forum | Sat Dec 24 08:26:41 EST 2005 | GS

Thank you, very intersting. Seen they've experimented also Sn Cu Ni on wave solder. Rgards............GS

Working with Lead free and Pb Capacitors

Electronics Forum | Fri Jan 27 10:58:11 EST 2006 | mafc65

We are running our prduction (TV's)with Lead Free Solder, since 1 year ago, but we still have a lot of Electrolityc Capacitor (Thruhole and SMT)in stock that are for PB Solder. We have to use them before February-06. Do anybody know if there is a pro

Mix Pb and Pb free alloy

Electronics Forum | Wed May 24 15:59:34 EDT 2006 | JohnM

I have a product with mixed in Pb free and Pb BGAs. I decide to use SnPb paste with Pb free reflow profile to make it work for both types of BGA. Do I have a reliability solder joint issue by using this method? How is your opinion on this case? Can


lead and free and profiler searches for Companies, Equipment, Machines, Suppliers & Information