Electronics Forum | Fri May 26 21:25:52 EDT 2006 | mika
Yes we do place "big and heavy" SMT DC/DC:s on most of our board's. Please tell us what brand it is or at least what the package look like?!? For instance we place a different numbers of "heavy" DC/DC converters (40x20mm & 45x25mm) that has the pick-
Electronics Forum | Sat Dec 11 12:15:21 EST 1999 | Steve Thomas
We have a pretty challenging board (2-up panel, 15"x20", 48 20mil pitch QFP 100's and 2 25mil QFP128) that gives us LOTS of lead bridging on the 20 mil parts. There is typically very poor wetting on these parts also, and some joints just flat aren't
Electronics Forum | Thu Jul 12 18:21:37 EDT 2007 | arburgos
We are considering buying a new stencil washer machine. We stencil print boards with NC solder paste and in the near future Lead free solder paste. I'd like to hear your experience with this equipments and what you recommend.
Electronics Forum | Tue Jul 18 19:20:25 EDT 2006 | sharifudin
Actually we run lead free solder paste and the profile spec very tigh.I can't use capton tape due my product in panel form and save cost.I already verify conveyor,machine and tool free from dust and solder paste but the problem still remain.
Electronics Forum | Fri Jun 09 11:55:34 EDT 2006 | jbrower
Howdy Amol, As far as I can see, there aren't too many pitfalls with SN100C. Just make sure to keep all of your alloys seperated. The issues that I am working out right now is the profiles with our wave pallets and some of our larger components. We
Electronics Forum | Tue Oct 10 20:14:01 EDT 2000 | Dason C
Hi! CJ. Please advise what is your pitch size ie 15.7 mil or what is your capabiliy can you build the board with pitch 15.75 mil (please note that the actual dimension of the package is 0.4mm), and how many lead on the package. The pad width of Ind
Electronics Forum | Sat Sep 18 12:10:19 EDT 2004 | Steve Gregory
I have a question about solder masking via's in a BGA pattern, and want to see if I'm thinking correctly about this. This problem is kind of along the same line as Carol's problem earlier. I think it's a bad idea to leave the via's free from solder
Electronics Forum | Tue Feb 25 06:34:50 EST 2020 | hexton
The reason the resistors are fitted at a later stage is to complete the circuit but the values that will be fitted depends on the frequency range desired. My preference would be to leave them free of solder, limiting the options for the process used
Electronics Forum | Tue Oct 06 15:01:33 EDT 2020 | charliedci
We've used glass (pyrex, corningware) bread pans in the past, not filling them much over 1" deep. It takes a while but leaves solder ingots sized well to drop back in. Have not tried lead free yet, the higher temp could be an issue using same ty
Electronics Forum | Thu Oct 08 14:04:04 EDT 1998 | Kris Ewen
Manish, I've seen similar phenomenon when processing CSPs on our cards. In our case, we were placing the components over the opening to in-pad blind vias. Due to poor drilling and plating processes by our board suppliers, volatiles were outgassing
