Electronics Forum | Thu Dec 14 04:42:11 EST 2017 | jineshjpr
Can anybody suggest how can I achieve good solderability in convectional reflow oven If I reduced Convection Air Speed 80%. The whole purpose is to reduce 0402 LED tilting in the convectional reflow and the PCB having QFN with 60 to 120 sec soak, 30
Electronics Forum | Thu Dec 14 05:07:55 EST 2017 | tsvetan
picture of the problem would help people to speculate what you do wrong
Electronics Forum | Thu Dec 14 15:05:17 EST 2017 | emeto
I am pretty sure, you are looking into the wrong spot. Your paste is too much, or your part has very inconsistent narrow leads(that includes wrong pad design as well.)
Electronics Forum | Wed Dec 20 07:16:16 EST 2017 | stephendo
I agree with Evtimov. What he didn't point out is that the surface tension of the solder would vastly overwhelm any force from air flow.
Electronics Forum | Fri Jul 04 12:32:33 EDT 2003 | sam
I need some advice about a problem that happened in a SMT LED: The failure symphoms of this SMT LEDs is that the LED body itself seemed to be functional, but when soldering on the products, it showed good wetting and soldering, LEDs are bright and l
Electronics Forum | Fri Jul 04 21:09:04 EDT 2003 | ramanandkini
I have a CEM-1 PCB board with 35 microns copper. This is PCB is finished with SMOBC+HALS. We do solder SMT LEDs, but till date we do not have problems that you have listed. The LEDs are good & bright. It even passed high & low temp cycle tests (-40 t
Electronics Forum | Mon Jul 07 23:27:41 EDT 2003 | MA/NY DDave
Hi Sam, I am going to guess that a problem is being caused by processing to effect the inside of the LED package. Send some failed LEDs back to the manufacturer to do a failure analysis. Also ask the manufacturer for info on their SMT processing q
Electronics Forum | Mon Jul 12 04:19:19 EDT 2010 | jepoy18
Hi All, Good day, Is there a Paper type packaging for LED 1608. Our available feeder in our production is for paper type but we are using emboss type reel packaging... thanks and regards.. Jeff
Electronics Forum | Sun Jul 06 14:12:51 EDT 2003 | ramanandkini
I wish to inform you that our boards are reflow soldered with Infineon (OSRAM) make SMT LEDs.
Electronics Forum | Mon Jul 07 00:22:38 EDT 2003 | sam
Thanks for all the answers. I should clarify that the problem was found to be on the SMT LED gold plating, instead of PCB gold plating. We had confirmed this problem by running some DOE experiments and some reliability testings. We had decided to d
