Electronics Forum | Thu Jan 06 06:09:43 EST 2005 | calibration
does anyone know of a LED test solution for multiple LEDs' on a PCB that can be used in an incircuit or a functional fixture
Electronics Forum | Thu Jan 06 10:56:32 EST 2005 | Rob
If the Leds are not in close proximity then LDR's can be used connected to a node on the ICT/wired into a micro for a simpler board - you can then test for luminous intensity as well as absence. Else you could use a cheap CCD camera with some simple
Electronics Forum | Mon Nov 14 02:39:39 EST 2005 | lantech
Hello all! Our test adapter have not a plate, which close test probes. We want to do a plate with through holes for test probes and holes for guiding and centring pins. We want to order a making this one. Adapter is MTS180. Thanks.
Electronics Forum | Wed Dec 23 15:35:18 EST 2015 | taborheiking
So I'm in Maintenance and I've been getting a lot of component feeder magazines back that have faulty circuit boards etc and I was wondering if there was anyone out there who has made a desk top test fixture for any of the Agilis or TMD Magazines or
Electronics Forum | Thu Feb 24 14:04:07 EST 2011 | caurbach
Try this: http://www.mouser.com/catalog/catalogUSD/643/2223.pdf Adam
Electronics Forum | Wed Mar 02 08:18:18 EST 2011 | rway
You can contact IDI directly. Also try QA, they are a little cheaper in price. .050 center probes are not uncommon and should work for your application. Both may have a minimum order of 200 pieces or so. I don't know what Mouser's minimum order a
Electronics Forum | Thu Feb 24 12:40:29 EST 2011 | thenrz
Hello all! Here's my issue: I've been assigned to make a programming fixture for a contract product we've been making. We're ramping up to 300+/month so it's becoming necessary to have more permanent fixtures. Usually, when programming, we have a
Electronics Forum | Wed Feb 03 08:53:15 EST 2010 | ssager
I have a goal to reduce the weight of about 20 test fixtures to go below 35 lbs. Most of the current fixture weights exceed 40 lbs. Does anyone have any suggestions on a lifting device or a method to reduce the weight of the fixtures?
Electronics Forum | Fri Mar 19 03:13:35 EDT 2010 | mun4o
Hi, First check what the Moisture Sensitivity > Level of the LEDS is....you may need to ask the > LED manufacturer. Once you've established it is > moisture sensitive then follow latest version of > IPC JEDEC 33 spec. for storage of them and dryi
Electronics Forum | Mon Mar 22 10:24:14 EDT 2010 | mun4o
Hi , I think that our problem is humidity, because when I use leds from new tape ( pack in MBB ) no any defects.After that, we put opened tape in our store.After 2-3 weeks I use the same tape with leds, and we have 2-3% defective leds.I make this tes
