Electronics Forum | Tue Aug 03 10:11:11 EDT 2010 | keiths487
we have an HSP that keeps giving nozzle level (low) out of tolerance, we have performed lighting check, also this condition is only showing up on 3 or 4 heads...any input appreciated
Electronics Forum | Tue Aug 03 16:12:54 EDT 2010 | namruht
Just to get the simple stuff out of the way. Make sure that no one has changed the machine nozzle data to a different type. Then try actually changing the nozzle data and putting that type into the head. If this passes it will at least eliminate the
Electronics Forum | Tue Aug 03 12:20:38 EDT 2010 | namruht
Is this on all 6 nozzles on those particular heads or just some. Try swapping nozzles with another head to make sure you do not have nozzle issues.
Electronics Forum | Tue Aug 03 14:28:23 EDT 2010 | keiths487
the "hooks" appear to be in good shape and are holding the nozzles up...machine will run even utilizing those head/nozzle combinations...we will check the valve, and verify proper operation, during non-production time....
Electronics Forum | Tue Aug 03 14:32:04 EDT 2010 | keiths487
random nozzle and head combo's all around the turret...head 1,4,8,11,13,14 and always nozzle 1 or 2
Electronics Forum | Wed Aug 04 08:37:24 EDT 2010 | keiths487
Just to get the simple stuff out of the way. Make > sure that no one has changed the machine nozzle > data to a different type. Then try actually > changing the nozzle data and putting that type > into the head. If this passes it will at least >
Electronics Forum | Tue Aug 03 11:40:41 EDT 2010 | swag
HSP nozzles get pushed back up into the head by a cam with a pneumatic brake on it. Make sure this is functioning properly. It is not uncommon for the MAC valve that actuates the brake to get flaky = replace it. Also, the nozzles are mechanically
Electronics Forum | Tue Aug 03 17:45:43 EDT 2010 | swag
I used to wrench on those all the time! I really should be more help to you but it was a few years ago... A few more things to check - clean the line sensors on the back of the machine. Check to make sure you don't have a feeder that is allowing t
Electronics Forum | Wed Aug 04 08:40:37 EDT 2010 | keiths487
I used to wrench on those all the time! I really > should be more help to you but it was a few years > ago... A few more things to check - clean the > line sensors on the back of the machine. Check > to make sure you don't have a feeder that i
Electronics Forum | Mon Aug 21 11:38:20 EDT 2017 | smdbert
Hello , How to solve this problem. Thnxs Bert
.gif)
.gif)
