Electronics Forum | Tue Nov 15 08:41:04 EST 2005 | Joe Wesley
Since I asked the question - here is what we have identified. We are doing what we call a jump score. Routing critical areas with v-score in non-critical areas. We have optimized the v-score depth as much as we can without having separation through h
Electronics Forum | Mon Dec 19 10:23:47 EST 2005 | DannyJ
Hi Grant, Here's one paper I came across for a customer of ours, seems they had heard that pb-free bgas cannot be done in pb paste. http://www.leadfreemagazine.com/pages/pdf/Clech_APEX2004_Paper-final.pdf I have another from a swiss lab that did
Electronics Forum | Wed Sep 29 09:35:39 EDT 2010 | blnorman
Can any body help me that how can I check the > strength of the 0603 capacitor & how much it > should be? Is there any standard for the > soldering strength of the Diffrent SMT > packages. Manjeet singh I'm not aware of a standard that provides
Electronics Forum | Tue Nov 10 19:12:10 EST 2015 | billthebuilder
I am trying to make a PCB populated with complex components such as LGA, WLBGA, LGFP, LFCSP, VFBGA, QFN, FBGA, PBGA so that we can test out some PnP machines. I have found parts on digikey for each of the packages we want to test but trying to make
Electronics Forum | Thu Jun 14 23:21:30 EDT 2001 | oem boy
I am working on 0201 development for my company in the UK, and I am planning a rather extensive DOE for my reflow oven profile. I am planning on studying various ramp rates, soak times, times above liquidus, peak temps, etc... My biggest concern
Electronics Forum | Fri Dec 04 19:17:03 EST 1998 | Jason
Jeff, I used conductive epoxy for diebonding and chipcaps on hybrid xtal controlled osc. We were applying via stencil printer, then curing in a KME vertical cure, a real foot print saver. Even under controlled environmental conditions, it was a re
Electronics Forum | Mon Jan 13 18:22:55 EST 2003 | davef
100 sec) and decrease reflow temp to 205C. * Understand that voids are primarily process indicators. There is experimental evidence that voids retard crack propagation locally around the void on a temporary basis. There is no standard, IPC or otherw
Electronics Forum | Fri Feb 21 11:33:47 EST 2003 | Jaime
Call your glue manufacturer. It sounds to me that the epoxy is not curing properly. You should also test for shear strenght. How many pounds of pressure does it take to "pop" a cured component after it comes out of the oven? What type of oven do you
Electronics Forum | Fri Mar 07 05:36:21 EST 2003 | O' Connor
Hi Again, In answer to DaveF - Yes solder is fine where the solder paste is deposited , but the part of the pad visible after pasting is still visible after reflow. Previously the solder paste & all the gold diffused & flowed giving a complete silve
Electronics Forum | Wed Mar 30 16:46:03 EST 2005 | chunks
There is no spec because solder is designed to provide an electrical connection not a mechanical connection to hold the part on. If it where mechanical we�d be welding our parts on. Your pad width and length are derived from your component manufact
