Electronics Forum | Tue Jun 27 09:12:15 EDT 2000 | james liang
hello all, DSS Model of cordless phone base unit during process TOP - REFLOW- FCT - BOTTOM - REFLOW - Wave solder and then the IC101 leg of RF unit lifted..?
Electronics Forum | Thu Jun 29 11:08:55 EDT 2000 | Dave F
Kok Han: Good to hear from you. Please help us understand you situation better by talking more about: � Component IC of the RF unit (IC101). For instance: SMT / PTH, package, pitch, lead material, lead finish, package type, package weight, coplan
Electronics Forum | Wed Dec 04 04:28:58 EST 2019 | oxygensmd
It seems there isn't right connection between solder and solder-legs. Maybe check that the LEDs get huminidity, have some oxidation on the legs, try different solder paste, check the reflow solder profile. On the photo I can not saw properly reflowe
Electronics Forum | Thu Jan 16 05:10:46 EST 2020 | soupy
Hej, we have some connectors placed on our PCB. 2*30legs 0.5 After reflow we detect lifted legs in the AOI. Always on the outer corners. Is this something ye have experienced? And any possible solutions? Stuff we have tried: Checking the cop
Electronics Forum | Mon Sep 13 10:39:50 EDT 2004 | Marie
Suggest looking at the packaging,is it sufficient to prevent damage to the QFP?. What way are these components stored when received?.Are the reels stored in boxes or racks?.Storage in boxes may cause damage from stacking the reels on top of each oth
Electronics Forum | Fri Jan 17 11:40:36 EST 2020 | davef
Try preheating the connectors
Electronics Forum | Fri Aug 07 14:52:43 EDT 2020 | glasscake
Does anyone have a comprehensive manual or some pages on how to setup/how the laser height functions work on a Mirtec MV-7U? (Mirtec Inspector 4.5.6) Even a sentence describing what each input for these tools do would be amazing. I FINALLY was able
Electronics Forum | Fri Jan 17 02:29:59 EST 2020 | soupy
Thanks Dave, We have avoided rotating the board as it is so long but we will test. Maybe we will to try screen it in one direction and then rotate it before the oven. We have the maximum solder we can get there at the moment. The reflow engineer
Electronics Forum | Sat Aug 11 05:29:31 EDT 2007 | johnz
We are having a problem with JST connector ICM-MA50H-SS52-1161 LF SN. After reflow oven soldering we have mostly problem with soldering quality for firs or last leg of the connector. (There is no connection- leg just lays-lift on the solder no wicki
Electronics Forum | Thu Jan 16 10:07:12 EST 2020 | davef
Hej back at ya Your connectors could be warping during reflow. Find out by putting a connector on a hot plate and increasing the temperature. If so, you might get away with a simple fix of rotating the board 90* on your reflow oven conveyor. If you