Electronics Forum | Mon Feb 14 14:59:44 EST 2000 | hany a. salam
Hello there: We urgently need a 45mm FRONT CAMERA to be installed on a Philips pick & place M/C. The M/C model is EMERALD & it is one of the GEM line series. The camera should manage to visualize the BGA components. Please if anyone can give a hand
Electronics Forum | Wed Apr 07 21:49:44 EDT 2004 | Ken
My favorite kind of calibration is where the machine learns what it did incorrectly. Then fixes itself! However, there are many types of machines that rely on human feedback as to the results of what it did. nozzle calibrations involve many factors
Electronics Forum | Mon Jan 14 19:07:29 EST 2008 | swag
Your IC's should run great. I have changed out a handful of cameras inside the box (you know when your camera is burning out because the monitor will show black/gray horizontal lines). It's pretty easy. Aftermarket cameras are about $350 I believe
Electronics Forum | Wed Sep 21 15:13:08 EDT 2011 | gregcr
Where are you located? Along the same lines, I have a trick I used a couple times when replacing a camera. It is often not the image sensor that goes bad, but the camera electronics behind the sensor. I have had luck taking the camera apart but le
Electronics Forum | Mon Sep 02 15:20:48 EDT 2013 | aemery
Interesting! not the usual error. In my experience when the vision cables get damaged it shows up and white noise flashes across the monitor. The connections are the easiest to check so here's your system layout with connection points. Starting at
Electronics Forum | Wed May 25 05:04:01 EDT 2005 | steve sennett
Fred, Yes it is along with a host of other parts for 180's and 120's including a vision system heads station comp.line comp. and cameras. you can reach me at ssennett@primus-tech.com
Electronics Forum | Tue Nov 18 10:24:45 EST 2014 | jpal
Feeders for your SMT machine. They can be a considerable expense, and you will hardly ever have enough if you have a high mix of products. You will wear out nozzles on the pick and place also. I don't see AOI in your machine list, so at least you wil
Electronics Forum | Thu May 13 12:24:26 EDT 2004 | cyber_wolf
We have an older line scan camera on our MY series machine.(The one that uses the X wagon trigger/encoder to turn on the line scan)When I go into the service program and turn the line scan camera to "camera action on" the LED's will only stay lit for
Electronics Forum | Tue Apr 04 16:17:27 EDT 2017 | bk
Does your my9 have any cameras aside from the x wagon camera and hydra camera? I believe you need a camera aside from these 2 such as a line scan camera to be able to use the auto teach option.
Electronics Forum | Sun Sep 25 16:02:59 EDT 2005 | mark
The calibration was ok. When i switch off the back camera and use front one everything is ok. Is it true that when Topaz use back line camera after checking the components the machine rotates the components 180 degree?. Mark \
winsouce.jpg)