Electronics Forum: liner (Page 1 of 3)

ESD question

Electronics Forum | Tue Jul 12 10:04:23 EDT 2005 | slthomas

Try sliding a standard plastic trash can liner in and out of the can a few times, then crumble up a few styrofoam (polystyrene) packing peanuts and dump the bits in. You'll be lucky if any of the bits even reach the bottom, unless it's an ESD safe re

Wash Basket Liner Supplier

Electronics Forum | Tue Jun 26 14:54:10 EDT 2018 | etmpalletguy

Be careful, and make sure you ask for proof that the liner your buying is ESD safe! Also, make sure your customer is aware that the liner is made from silicone, in most military & aerospace, no silicone can touch the PC! If your liners are 18x18 and

Wash Basket Liner Supplier

Electronics Forum | Wed Jun 13 14:33:32 EDT 2018 | beavispkp

I'm looking for a supplier of ESD safe liners/netting/mesh we can use in our PCB wash baskets. Any help is appreciated.

Wash Basket Liner Supplier

Electronics Forum | Fri Jun 15 06:52:54 EDT 2018 | beavispkp

Thank you!

Wash Basket Liner Supplier

Electronics Forum | Thu Jun 28 13:42:31 EDT 2018 | aksaustin

Are you just washing WS boards? Are you using any chemicals?

Wash Basket Liner Supplier

Electronics Forum | Thu Jun 14 20:33:50 EDT 2018 | davef

Try: AGI: agicorp.com/products/tooling/wash-baskets 256-858-3300 JENSEN Tools: jensentools.com/desco-41403-esd-safe-pcb-wash-tray-liner-18-x-18/p/482-89 800-225-5370 Stone Mountain Tool: stonemountaintool.com/fixtures/products/wash-fixtures/ 800-

ESD safe wash basket liner/cover

Electronics Forum | Thu Feb 11 10:59:09 EST 2010 | sumote

I am having some trouble finding an ESD safe wash basket liner. The trouble isn't finding someone who sells a product, the problem is all 3 products I have evaluated fail testing. All 3 were generators in excess of 2kv with 1 hitting over 4kv! This i

MYDATA Myspeed software is total junk

Electronics Forum | Thu Jan 13 07:47:10 EST 2005 | Rob

Hi Grant, I'm sure the XP is a good machine, but don't expect CP performance or longevity from it, it's just not engineered the same way (i.e. it's not the size of an ocean liner). Rob.

Label Peeling Off

Electronics Forum | Wed Apr 13 08:56:39 EDT 2005 | Dhanish

Hi, I need help as we are seeing high defect on label peeling off which is attached on the PCB.After remove the liner on the Lexan label,we realize there is crack in the adhesive and base materialPlease advise what test can be done to ensure there is

ESD question

Electronics Forum | Thu Dec 22 09:36:14 EST 2005 | rsmith

Diane, you are "right on". The key to eliminating ESD problems is to make sure that the operator, the work surface, and the ESDS device are at the same electrical potential. Also you must elimanate any static producers from the ESDS area or provide a

  1 2 3 Next

liner searches for Companies, Equipment, Machines, Suppliers & Information