Electronics Forum | Thu Mar 23 19:55:40 EST 2000 | Dave F
Sorry, we run a WS shop that doesn't have enough margin to affort to use no-clean. Good luck. Dave F
Electronics Forum | Fri Jun 22 12:06:21 EDT 2001 | Pete
The 4713 is an old model, first came out in the late 80's. Recreated as 4713B, C & finally D. Check with UIC on the service issue. It shoots dots at around 18K per hour. Camalot is a far superior machine for liquid dispensing.
Electronics Forum | Fri May 11 11:44:24 EDT 2007 | miguerre
Hello, We are currently looking for a technician to help us service/troubleshoot a Cam/Alot 1818 liquid dispenser machine. If you know of a company/person that could provide this service please give us the contact information. Thanks in advance
Electronics Forum | Wed Jul 28 11:47:16 EDT 2004 | GCronin
I am looking for a consistent method of applying no clean liquid flux to solder pads. My main concern is if I use a standard air-over type dispenser mounted to an automated arm that the liquid flux will make a mess and not be consistent. I'm not to
Electronics Forum | Thu Mar 23 08:34:45 EST 2000 | Shane Lay
Dave, Thank you for the information. We will be conducting several tests in the near future that will evaluate the corrosion/contamination response as it is our primary concern once we remove our aqueous processes. We are well aware of the effects
Electronics Forum | Thu Aug 05 12:02:48 EDT 2004 | Vince W
Go on the WEB and do a search of "Spray Fluxing" Several options should show up Good luck with your search
Electronics Forum | Sun Feb 03 08:12:38 EST 2002 | davef
I&J Fisnar [2-07 Banta Pl Fair Lawn, NJ 07410-3002 201-796-1477 Fax 201-794-7034 http://www.ijfisnar.com info@ijfisnar.com ] makes a very good quality bench-top liquid dispenser. A base machine costs about $10k. Programming is relatively easy, alth
Electronics Forum | Tue Mar 21 20:33:09 EST 2000 | Dave F
Shane: We don�t dispense, but we have thought about it. Several points about peelable solder masks in a no-clean (low residue) process: � Beware of latex peelable solder mask with a low res process without extensive testing. The problem is usuall
Electronics Forum | Mon Jun 05 12:30:24 EDT 2017 | deanm
Mike, The dispensable solder paste is ordered separately from the printed paste because it has a higher flux content. I would not feel comfortable mixing liquid flux into the printable paste. Ask your paste vendor if they have a dispensable version.
Electronics Forum | Wed Feb 13 13:32:15 EST 2002 | caldon
Liquid Control Corp May be able to intergrate a unit like you speak of. Contact Geoffrey Silver at : 215-918-0872 or silver@liquidcontrol.com. Best regards, Cal