Electronics Forum | Fri Oct 17 06:44:32 EDT 2014 | hemant_pang23
We are doing hand soldering for the 'BATTERY LITHIUM COIN CELL 3V CR 2032 but now we want do the soldering through wave soldering process ,for avoiding the shortckt only one pin will get solder through wave process and other pin will be soldered manu
Electronics Forum | Wed Apr 25 16:08:24 EDT 2001 | jmills
We build a product that requires a lithium battery. There is a Smt Battery clip soldered onto two gold pads on a FR4 PCB. The battery is forced by two little clips punched out to provided downward pressure in the battery holder, enabling the lithium
Electronics Forum | Wed Apr 25 16:09:45 EDT 2001 | jmills
We build a product that requires a lithium battery. There is a Smt Battery clip soldered onto two gold pads on a FR4 PCB. The battery is forced by two little clips punched out to provided downward pressure in the battery holder, enabling the lithium
Electronics Forum | Wed Apr 25 16:12:18 EDT 2001 | jmills
We build a product that requires a lithium battery. There is a Smt Battery clip soldered onto two gold pads on a FR4 PCB. The battery is forced by two little clips punched out to provided downward pressure in the battery holder, enabling the lithium
Electronics Forum | Tue Feb 05 16:44:35 EST 2013 | rway
Just an FYI regarding the 8080 buffers: When you replace the lithium battery in the display module, replace the one in the PLC as well. Of course, you will need the machine turned on when replacing the batteries.
Electronics Forum | Fri Sep 26 08:11:15 EDT 2008 | dwelch123
Try swapping cards in Y1 enclosure. You can swap zero and one or two and three but make sure you change the shunt position and the dip switch settings and see if your problem switches cards. The lithium battery likes to fail on those cards. Reload th
Electronics Forum | Mon Oct 11 17:14:30 EDT 2010 | markhoch
I've had this problem before. Typically happens when the Lithium Battery dies and the machine loses the program. Usually you can pull the displays out and ship them to Simplematic. They can reload the program for you. Roughly $2500 bucks I think. Cal
Electronics Forum | Fri Jan 25 13:13:04 EST 2013 | markhoch
Lithium-Ion batteries frighten me. It doesn't take much for them to become a fire hazard.
Electronics Forum | Mon Jan 28 11:22:46 EST 2013 | rway
Does anyone have any experience with these buffers? I have one that has come up with an error message "No PLC Driver." According to the documentation, the issue is the lithium battery in the operator interface. I have confirmed that the battery is
Electronics Forum | Thu Dec 30 04:59:19 EST 2010 | tpappano
Hello David, there are people here running these fine old machines. I have two, one I've been running for two years and another I've just acquired. It is not required to have a computer connected, but it will become handy for backing up and maintain