Electronics Forum | Mon Mar 19 14:24:30 EDT 2007 | jdengler
I have been involved with the evaluation of close to a dozen pastes from 5 manufactures. I never found one that would rest on a board for anything close to 24 hrs and still have acceptable performance. Jerry
Electronics Forum | Thu Aug 10 11:32:34 EDT 2017 | dleeper
You could always take a scrap board, paste it, and let it sit out over night. Reflow it and then you should have a nice visual aid, covered in solder balls and grainy, irregularly shaped solder mounds.
Electronics Forum | Mon Mar 19 10:35:44 EDT 2007 | dyoungquist
We use a no-clean lead free paste with our manufacturing floor temp 70-75F and humidity 20%-30%. We have found that if the time from pasting a board until it goes into our reflow oven is less than 4 hours we have no problems. If it is greater than
Electronics Forum | Thu Mar 29 08:58:06 EDT 2007 | chrissieneale
Started measuring rework last week - on some of the boards we are looking at a shocking 20% right first time yield. The paste thing has to be fixed as it's being left more than four hours. Thanks for all the comments - Will let everyone know the re
Electronics Forum | Thu Mar 29 09:11:23 EDT 2007 | slthomas
chrissie, at my last place of employment the reason they did it was so they could print the last of a lot, then change over the printer and start printing up for the next lot and have some ready to go when they finished changing over the chip shooter
Electronics Forum | Thu Apr 20 14:33:18 EDT 2006 | dirk29
We had that problem with our printers we just drill and tap the top end of the stop and put a short screw in to allow us to adjust the top height of the stop and catch the board. Be careful not to make it to long or to could restrict the board from l
Electronics Forum | Wed Jul 01 11:19:50 EDT 1998 | Earl Moon
| I'm having a problem getting good reflow on gold sufaced boards. The profile looks good and I have adjusted it both hotter and colder and adjusted the various times ( soak, reflow ) to no avail. What realy gets me Is that a month ago we built some
Electronics Forum | Thu Jul 02 15:23:15 EDT 1998 | Justin Medernach
| | I'm having a problem getting good reflow on gold sufaced boards. The profile looks good and I have adjusted it both hotter and colder and adjusted the various times ( soak, reflow ) to no avail. What realy gets me Is that a month ago we built som
Electronics Forum | Fri Feb 11 10:37:54 EST 2000 | Leslie Hall
I'm trying to find out what is considered a standard or what other companies are doing to test their cuircuit boards. Is everyone using a envirmental room if so what is the ramp up and how long do you test it? Thanks
Electronics Forum | Tue Apr 03 13:10:15 EDT 2007 | slthomas
Personally I wouldn't count anything but minutes. You need to know how long it takes to perform each task in order to balance your line. What I'm gathering is that you've got one printer feeding 4 machines, all running different jobs or maybe a pai
