Electronics Forum: longer (Page 95 of 117)

MyData Placement Accuracy

Electronics Forum | Thu May 18 03:30:05 EDT 2006 | Grant

Hi, Guru, you are completely full of crap. I have had three MYDATA machines, and battled with accuracy the whole time we had them. We did every upgrade, and added the latest feeders and line scan cameras. In the end we could not keep the accuracy g

LQFP128 doesn't work when cold

Electronics Forum | Tue May 30 13:50:40 EDT 2006 | Dragan

Hi, I ran into a problem and need a solution. It is a 3cm*4cm*1mm 2 layer PCB (6x6 panel) with a LQFP128 package Microcontroller, a resonator and 2 capacitors. What happens is: When i recieve the assembled pcbs from the assembly plant they wor

LQFP128 doesn't work when cold

Electronics Forum | Tue May 30 17:17:08 EDT 2006 | Dragan

Hi, I ran into a problem and need a solution. It is a 3cm*4cm*1mm 2 layer PCB (6x6 panel) with a LQFP128 package Microcontroller, a resonator and 2 capacitors. What happens is: When i recieve the assembled pcbs from the assembly plant they wor

Problems with SN100C in a Soltec Delta C Wave

Electronics Forum | Sat Jun 10 11:16:10 EDT 2006 | Dr. Bocephus H good time budwieser Expert Guru Phd. DDs. Wow!

Yeehaa! there little doggies, y'all just got to mine that there smuckonium or that there, other stuff that fella dr. guru recomends. Doin' that and all yer problems magically dispear. Grant, sounds like you're in a tree like a one balled coon chas

Stencil cleaners.

Electronics Forum | Thu Sep 14 13:13:29 EDT 2006 | Kevin W. Parker

I am a tool and process engineer responsible for the cleaning system at Siemens VDO in Huntsville, AL. I have been over this area for more than 8 years. We use EMC Cyberclean 3000RF spray in air cleaners with Zestron SC202 chemistry. At this facil

soldering to thick gold plating

Electronics Forum | Wed Jul 12 11:26:12 EDT 2006 | flipit

Hi, I believe you have classic gold imbrittlement here. With 80 microinches of gold you are way over the limit. You can try to reflow longer time and at a higher temperature. The gold does not melt into the solder joint. The gold dissolves into

SMT Environment

Electronics Forum | Thu Aug 10 10:13:11 EDT 2006 | pjc

I have never seen any industry standards for setting up an SMT assembly facility, but I�ll offer some basic advise. An ideal SMT assembly facility is one that is clean and well lit and has environmental controls to maintain temp and RH. Temp of 24C (

Reverse Spike

Electronics Forum | Thu Aug 17 09:38:28 EDT 2006 | pjc

Having the last two zones at the reflow temp (spike) is typically done on long ovens (10 zone) running at high conveyor speeds. This enables you to achieve peak temp and TAL as per the solderpaste specs at high production rates. Concerning reverse sp

Reflow profiling Units

Electronics Forum | Wed Sep 13 10:31:14 EDT 2006 | CL

Hello Brad, We are running the Slim Kic 2000. We have found the predictions to be fairly accurate as long as the suggested change is within 20 degrees of the original recipie. As a test I ran a board with the wrong profile. The predictions got me wi

Advice Needed between a DEK 265GSX and a MPM UP3030!

Electronics Forum | Thu Oct 05 16:45:19 EDT 2006 | realchunks

Wow, I'd have to say the exact opposite. Compared to MPM the DEKs were WAY longer to program. But find out for yourself CN. Program each and get back to us. Don't forget to program in 2D as well. That will be the kicker! As for spending money,


longer searches for Companies, Equipment, Machines, Suppliers & Information