Electronics Forum | Tue Mar 02 22:56:49 EST 2021 | cbeneat
We order from LUBCON. They are in Michigan.
Electronics Forum | Thu Mar 03 09:58:59 EST 2005 | Marc
The gears should be wet. This gear box acts like a rear end axle. Not sure of the lubricant but it is like a red transission lube, comes in as complete unit from supplier. You can't get the lube from Speedline since it is sold as a complete unit.
Electronics Forum | Mon May 30 11:37:01 EDT 2005 | stepheniii
I don't know this machine but I have seen a similar problem on other machines. Have you cleaned and lubed the guide rods for the x-axis? It's easy to forget that AOI machines do need some maintenance. Is it possible that it hangs, while waiting for t
Electronics Forum | Mon Jul 03 23:29:26 EDT 2006 | grantp
Hi, Don't know about your machines, but our XP Fuji machines have a lubrication tube linking the under side of the machine to the top, so you can put a grease gun on it, and push grease into hard to reach places. Does yours have that? If your heari
Electronics Forum | Wed Sep 20 10:05:10 EDT 2006 | SWAG
Not familiar with 3C/4C but if the head is similar design to Samsung then you might consider flushing the tubes and airlines that go to the nozzles. We used to disconnect the airlines at the top and run cleaner down through the tubes. We would then
Electronics Forum | Mon Oct 22 08:52:57 EDT 2007 | mulder0990
Does anyone have a defined maintenance program for their Fuji CP-6 feeders. I am working with almost 2000 feeders and I am looking for what most techs use as a schedule. Also, any vendor sites that you get parts from. Also what is the best, long l
Electronics Forum | Thu Mar 04 19:03:48 EST 2004 | pdeuel
Have you been re lubing chain after cleaning. Is the chain worn thru from friction on rails. How are carbonized particles removed from inside links after cleaning. What is recomended method for cleaning.
Electronics Forum | Tue Jan 25 16:39:13 EST 2005 | russ
Do you have manuals for any aother wave machine? If so just use that, they are all pretty much the same. dedross daily, clean nozzles and heating elements monthly, straighten/replace fingers as required, clean and lube conveyor semi-annualy, etc...
Electronics Forum | Tue Feb 15 09:40:35 EST 2005 | jdengler
It wasn't a CP6. I don't know if the CP6 needs lube or not. It just sounded very similar to a problem I had many years ago.
Electronics Forum | Mon Mar 20 11:08:17 EST 2006 | Chunks
Spare parts? Like what? If it's your belt motor, try cleaning out the gear box attached to it. 99% of the time it's the lube in this gear box that dries out and turns to glue.
