Electronics Forum | Tue Jul 12 10:33:24 EDT 2016 | dontfeedphils
I'd start by checking and reteaching the nozzles (this is automatic, it'll measure the nozzle length and vacuum values for each nozzle). After that double check the value you have entered for the PCB thickness as this will impact where the machine t
Electronics Forum | Mon Jul 11 11:05:53 EDT 2016 | bradholland
thanks for the replies so far. So far I have been relying on the board clamp on the machine that closes when the pwb is loaded. I have also been doing these tests with double sided tape on the pwb so i can clean them off easier afterwards. I have
Electronics Forum | Mon Sep 23 05:57:55 EDT 2019 | uzbek
Hi all, we have the opportunity to buy used Essemtec FLX2011 PnP machine. The machine is made in 2009 and the last two years it wasn't used. With the machine, we would get some feeders and all nozzles. Moreover, we would get the library from the EM
Electronics Forum | Tue Oct 09 14:10:24 EDT 2001 | cal
I am confused. You are using pressure sensitive tape. the pessure sensitive tape i have seen does not use cover tape.The pressure sensitive tape I am familiar with is called "Surftape" could you provide some more clarification?? Surftape is more co
Electronics Forum | Fri Jan 12 15:14:37 EST 2018 | dhollland
Does anyone have any experience with the Panasonic offline recognition machine? If so, thoughts? Would you recommend? Pros and cons? We would be using this with NPM W2 machines...and possibly CM402 machines if possible to use with both.
Electronics Forum | Fri Sep 03 00:17:21 EDT 1999 | JAX
You use MCS computers to transmit programs/data to machines | | --> MCSs are getting old, so you would like to use F4G or FujiCam just because you could use a standard 486/Pentium | | --> But you still like your current programming SW (obviously not
Electronics Forum | Wed Sep 25 10:22:21 EDT 2002 | matt2138
UltraSonic cleaners do a good job of cleaning both stencils and misprint PCBs. Make sure the frequency that the machine comes set to is ok to use with both stencils and misprint PCBs. If you are a CM make sure your customers are ok with using the ul
Electronics Forum | Wed Aug 28 01:19:52 EDT 2019 | robl
Quins can be a bit flakey, and the response times to issues slow. Quick and easy to use though.
Electronics Forum | Sun Mar 05 18:24:38 EST 2023 | davef
Submit an RFQ to used equipment suppliers here: https://smtnet.com/mart/index.cfm?fuseaction=rfq
Electronics Forum | Thu Oct 11 13:37:35 EDT 2001 | Stefan
The pressure sensitive tape is used as an alternative to heat sealed cover tape. It works usually quite well and is easily applied by the taping machine, but it can create some problems in the tape feeder. In the Surftape, Cal is referring to, the c
