16467 machine results

Electronics Forum: machine (Page 8 of 1647)

rating smt machine

Electronics Forum | Wed Jan 03 15:15:43 EST 2007 | John S.

I've worked with Juki and Panasonic/Create. Both have been good machines, but we've found Juki to be superior in cost, performance, and service. Our 750's are 8 years old and still run great. We've just gotten a 2060R this last year, and we've rea

solder paste measurement machine

Electronics Forum | Thu Apr 26 01:14:42 EDT 2007 | JJ

Hi all, We plan to buy solder paste height measurement machine. However, not sure which is the better one..2D or 3D? As far as I know,3D is quite slow and but more accurate in term of measurement result. Pls share with me if anyone who has this e

solder paste measurement machine

Electronics Forum | Thu Apr 26 16:43:16 EDT 2007 | Upper Management

Seminars and meetings are the best way to get a clear understanding of a machine's capabilities. I have found that the manufacturing engineers will oftentimes skew the results of machine evaluations with facts and data. In practice, I've found it

Prototype SMT assembly machine

Electronics Forum | Fri May 18 04:05:39 EDT 2007 | bartlozie

I'm looking for a SMT prototype & small series assembly machine, needs to be very accurate, no need for high speed. For assembly batch size 1 to 50 pcb's. The machine needs to be accurate and flexible, able to place chips 0402 up to BGA components.

Seeking AXI machine

Electronics Forum | Wed Oct 06 22:37:48 EDT 2010 | Jacki

Dear All I need to check the solder paste volume inside the PTH at our board,which size is 440x620 mm.So, I may need 3D inspection machine,AXI, not AOI.So, does anyone recommand me which 3D machine is suited to my PCB? Thanks in advance.

CS9100 wire cut/strip machine

Electronics Forum | Mon Jul 08 17:07:15 EDT 2013 | wsdauchy

We have 2 CS9100 Schleuniger wire cut/strip machines. They do not have the DISPLAY/PC switch on the back of the CPU card. THe two machines come up PC mode. Any one know of a jumper setting on the CPU board that will allow the machnies to run in DI

Juki 750L machine software

Electronics Forum | Tue Mar 10 10:25:37 EDT 2015 | menvox

Hello, I have a Juki 750L with a damaged hard disk. I need the machine software. If somebody have it, or a mirror copy of the hard disk.. Did somebody know where is located the offsets and setings of the machines? On the hard disk or on the computer

Simple conformal coating machine

Electronics Forum | Thu Aug 27 10:12:07 EDT 2015 | fcmtechnician

Hi buy a manufactured machine! is not hard to build one, but the know how after you build it is the key point for you! Are you able to build and control the applicator to coat your board? are also some Budget machine on this area, look for Dima, Ca

Simple conformal coating machine

Electronics Forum | Thu Sep 10 17:13:31 EDT 2015 | tombstonesmt

There are factors that manufacturers have taken into consideration when dealing with coating. On/off times, dispense speeds, heights, etc.. Dedicated software with tools to easily map out paths are a godsend. We made our own coating machine with a s

ASM SIPLACE machine OS

Electronics Forum | Wed Apr 10 03:46:29 EDT 2019 | oxygensmd

Depends on what machine you want to get. Linux OP used on S13-S15-S20-F3-F4 for a time but they changed to WinXP - after '96. The new software with WinXp is more stable as the Lunix version. The Linux version was really sensitive of LinePC-StationPC