Electronics Forum | Fri Aug 16 03:44:12 EDT 2013 | rollon65
Hi. Sorry I don't have an answer for this but I have the same problem in the "Y" axis on one of my 4Cs after the machine has run for around 4 hours. The machine seems to partially correct for the pick-ups being off as the placements are fairly good
Electronics Forum | Fri Jul 19 18:21:17 EDT 2013 | microaide
We recently purchased some used Quad 4C machines. One of them does not seem to keep a stable origin reference point. I teach the nozzle and component pickup coordinates, then suddenly everything seems to be off by .030 to .040 inches in the X axis. I
Electronics Forum | Mon Jul 22 14:06:16 EDT 2013 | bobpan
I dont have a machine to look at but its one of 2 ways.... 1. It finds a home sensor then counts out to a position. 2. It finds an etched mark on the glass scale then counts out to a position from there. I know the Q-series machines does the second
Electronics Forum | Mon Jul 22 12:43:31 EDT 2013 | microaide
I don't think it is a loose camera lens. We are actually off on the position of the Z-rod. It's not just the camera position that is off. We really can't change nozzles because the z-rod misses the hole in the nozzle changer. We have repeatedly clea
Electronics Forum | Mon Jul 22 04:59:01 EDT 2013 | bobpan
You have 1 of 2 problems. 1. The encoder is losing steps so it has a problem or the glass scale that it reads has something wrong with it....dirt,cracked,etc..... 2. The downward camera is loose or has a problem. With power on move the head to a posi
Electronics Forum | Fri Feb 12 19:40:42 EST 2010 | rodrigo
I posted the message below on Friday and today Monday I started looking at the problem again. We have a computer with a setup that works. It is the original PC we bought with the F4G but it is set up for a machine we do now have ,IP3. I was looking a
Electronics Forum | Sat Aug 06 11:47:24 EDT 2005 | jax
I have not used the machine so I cannot talk about ease of programming, actual cph, etc... but: There are a few things that interest me. intellegent feeder positioning - doesn't seem to matter where you put them, even while the machine is runnin
Electronics Forum | Tue Oct 09 22:21:54 EDT 2001 | caldon
.............and since this link originated from march of 2000 I should not expect a response
Electronics Forum | Mon Sep 03 11:11:48 EDT 2007 | lennielly
Perhaps I can help to translate manual into English,send me original manual.
Electronics Forum | Tue Nov 02 15:31:12 EDT 2010 | clarence
We are in need of a complete set of manuals (Originals or photocopy) for our Camalot 1818 machine. Willing to pay a reasonable price for these manuals. Please respond if you are able to assist us.
