Electronics Forum | Fri Jan 29 22:26:09 EST 2021 | ttheis
Thanks for the heads up. I suspect it is due to power dropping out to the IO chassis and other devices connected to the pdp. This is the first logicomm capture I have for it so I don't have other messages to compare it to. Machine has been running al
Electronics Forum | Fri Jan 29 18:47:35 EST 2021 | ilavu
The error in the attached picture(FCFF1043) is for 16 I/O card located in CIO slot one for board transfer. May be thats when your PDP supply drop voltage. If problem comes back, look at that card and/or connection and/or cable.
Electronics Forum | Tue Mar 01 03:17:40 EST 2022 | gary_sastrillas
Hi Guys, did anyone here selling the old siplace pro 7 up server with licenses Siplace Pro Server and Machine Connections License.
Electronics Forum | Thu Dec 15 12:41:48 EST 2022 | proceng1
Does the air and stuff kick on in the machine when it gets there? So you never get a message, it just sticks there? I've gotten stuck there, but usually it eventually gives an error. When mine did it, usually it was a library/ database/ connection i
Electronics Forum | Thu Oct 02 17:00:44 EDT 2008 | davef
Is that accurate? If so, what are your aspect & area ratios? [Similar to the JerryS comment above.] * You say, � � and the average height is very high: nearly 200 pct.� => Our troop can make paste that height too. They snap the stencil-off a fast as
Electronics Forum | Tue Jun 21 18:00:26 EDT 2022 | proceng1
I received an email from the OP and I will not be connecting on WHATSAPP.
Electronics Forum | Fri Aug 28 19:54:05 EDT 2020 | emeto
From what you explain: 1. check all movements X,Y and Z are moving free while machine is off. 2. Resit all driver cards. 3. Check interface cables or boards. Not sure if Juki is using CAN or other interface standard, but random motor errors might be
Electronics Forum | Wed Sep 10 23:06:36 EDT 2014 | andrespena
Sorry 10 days passed before I replied. This happened and that happened and I completely forgot about this forum. But here's my explanation: 1. How to get parts on the board? This is a very good point, and I totally understand why you believe I hav
Electronics Forum | Fri Oct 11 09:49:07 EDT 2019 | ttheis
FYI I did try logicomm but the log files were empty. There must be something wrong with my connections from the force board to the EPC. I'll keep investigating. I also swapped the EPC to see if that makes any difference.
Electronics Forum | Thu Jul 10 21:11:11 EDT 2014 | andrespena
@Alexei Shkolnik Ah, I hope this doesn't become a problem. But if it does perhaps we can redesign the whole system? Push the components with a pusher that's connected from above rather than pulled by a magnet below. Perhaps the pusher can still clim
