Electronics Forum | Thu May 12 01:20:48 EDT 2016 | darby
Check your interface boards and connections. Should be in your manual under "control rack/ board connection/ " then they have the various I/F boards. I don't know the initialisation sequence, but a PC whiz or Samsung should be able to tell you the or
Electronics Forum | Thu May 12 02:17:58 EDT 2016 | cspasol
Thanks Mr. Darby, We already Check All connections of I/F Boards, Restore OS, Change Motherboards and Install Backup for SmartSM files and Install new MMI (SmartSM files). But still same Problem. I have one possible cause in my mind is its MVME3100
Electronics Forum | Mon Mar 09 14:16:37 EDT 2020 | oxygensmd
I used to work with S15/F3, was a 10 years ago. 1. Test your machine controllers and station controllers. Load the last program with actuell command. 2. You can check what happening in the SiPlace, switch the monitor to MC, let see all bootup perfec
Electronics Forum | Thu Nov 13 05:35:50 EST 2014 | jlawson
Valor-Mentor has bardcode based verification solution with machine connection and control for most machines on market and options to connect to machines in various ways to lock system until verification process is done. Handles splicing and led binin
Electronics Forum | Thu Nov 13 05:36:37 EST 2014 | jlawson
Valor-Mentor has bardcode based verification solution with machine connection and control for most machines on market and options to connect to machines in various ways to lock system until verification process is done. Handles splicing and led binin
Electronics Forum | Wed Apr 03 09:12:11 EDT 2024 | hta1979
You have to enter the setup utility.Power off the machine,connect AT keyboard to the rear port, power on,press f1, load the bios setup defaults, enter the hdd parameters,in the first menu (Standard CMOS setup) (Cylinder,Head,Sector,Wprecomp) save the
Electronics Forum | Wed Jul 19 20:24:41 EDT 2023 | ttheis
Conveyors are connected to machines with SMEMA cable interfaces; any edge conveyor manufacturer will have this interface.
Electronics Forum | Mon Jan 19 15:11:30 EST 2004 | cal
www.smema.org Machine Interface Standard http://www.smema.org/smema1.2.pdf Here is where you can find Machine cable/ connector information as well as timing and interface Schemetic. I would contact Universal for the machine interface connection spe
Electronics Forum | Thu Aug 28 09:45:48 EDT 2008 | leemeyer
What is the model of the machine, 1414, 1818 ?? What version of software are you running. There is probably a safety touch strip (yellow rubber strip)that is around the head and possibly the front sides of the machine. Check the connections and wirin
Electronics Forum | Tue Aug 04 14:28:39 EDT 2020 | ttheis
Yes, I am certain it is 240 corner grounded delta. It confuses many electricians and it took me some time to understand. It is fed from a 480:240 delta 200A transformer. As I mentioned, they have a lot of Bridgeport 3ph machines and cnc machines conn
