Electronics Forum | Sun Aug 06 17:08:26 EDT 2023 | wijim
Restart the machine: Sometimes, a simple restart can resolve temporary glitches in the system. Check connections: Ensure all cables and connections are secure, as loose connections can lead to data transfer issues. Check for hardware issues: If the p
Electronics Forum | Sun Jun 05 00:00:17 EDT 2022 | curtisp
We are having a problem right now where the machine won't load the circuit boards (mot m, y, z, etc) due to the machine blowing the fuses. This was diagnosed by one of our engineers to be a problem with this part: MyData MyCronic Booster BNB/NREG L-0
Electronics Forum | Mon May 02 23:26:12 EDT 2016 | ttheis
Is this a dual-beam GSM2? Check to make sure the machine configuration is correct for the machine, otherwise I would look at encoders for the axis and electrical connections.
Electronics Forum | Thu Feb 29 02:24:55 EST 2024 | redspare1
Strange error, I have looked at the schematic and checked all of the e-stop switches and they're good. The machine isn't connected to anything, but air and power. Has anyone else seen anything like this? 1. When pressing the active button it beeps
Electronics Forum | Mon Aug 27 03:22:04 EDT 2012 | omur
As the machine was working before - and as it is not connected to any network and we do not use the floppy disks, I do not think that it is related to a virus.
Electronics Forum | Thu Nov 03 14:33:40 EDT 2016 | csm
Dear JummyB We noted that when the machine is initializing, and when all check step pass, we just push ready button and the main relay or contactor must be activated but is not, it looks like one Card in front of the machine where all the drivers ar
Electronics Forum | Tue Dec 06 17:52:06 EST 2005 | jbraime
Hi, Has anybody downloaded programs to their Contact Systems CS-400 machines using serial (RS232) connection? What kind of cable did you use (handshaking, loopback etc)? Which port settings were optimal for download? I'm using the csdown.exe appli
Electronics Forum | Thu Aug 22 11:30:47 EDT 2019 | rgduval
It's a motor controller card error. I'm not completely sure, but, it seems like something in the x. Swap MOT1 with MOT2 or 3, and see if the error moves. If it does, you have a bad MOT card. If it doesn't, you have something going on with a motor
Electronics Forum | Mon Mar 06 17:42:18 EST 2017 | jswatt
Hey folks, looking for some thoughts on an error we are getting with a DEK Photon screen printer where the machine switches on and we get a DEK_CSS message - Dongle Not Found. Please connect a valid Dongle & restart the machine. the machine was work
Electronics Forum | Tue May 26 23:42:20 EDT 2020 | smiran082
Hello, I am having trouble the QSV-1 PNP machine. On boot it had trouble connecting to the RT computer as it was hung on a message saying something along the lines of, "Establishing connection to RT computer". After several restarts we still could
