Electronics Forum | Fri Apr 03 07:08:30 EDT 2020 | compit
Asssembleon recommends Molykote 6169 (Yamaha #6169) grease for pneumatic components of heads, but it is no longer available. What do you use instead?
Electronics Forum | Mon Apr 06 04:42:37 EDT 2020 | richardcargill
Shell Alvania 2 ( or current equivalent )
Electronics Forum | Tue Aug 23 14:23:18 EDT 2005 | Just a Viewer
Your machine manual should have a list of grease and oil... if not contact machine manufaturing for details.
Electronics Forum | Thu Mar 23 15:20:57 EDT 2023 | ehess
Looking for a more affordable option than NSK GRS NSL grease for Yamaha YG100 machines
Electronics Forum | Mon Apr 10 00:25:40 EDT 2023 | shrikant_borkar
Hi, Before the replacement of any lubricant Please check and validate the Specifications of previous lubricants. Please get the written equivalent certificate from your supplier. also let notify your machine manufacturer about this .there shoundnt ve
Electronics Forum | Fri Mar 15 08:20:06 EDT 2013 | torch
we quite often see this on our quads usually only on the 8mm feeders, sometimes the tape roller can become sticky as suggested. usually i just remove the roller and apply a grease to the screw so that it can move freely also make sure that the peel
Electronics Forum | Thu Sep 13 11:01:39 EDT 2007 | cyber_wolf
Fuji specs out Omega 66 grease for the solenoid sliders on older CP machines. These solenoids run hot. Its interesting to me that this grease is designed for extremely low temperature applications. Whats up with that ? http://www.omegaoil.co.jp/ind
Electronics Forum | Thu Aug 04 21:43:57 EDT 2005 | davef
Stefan Who are the reputable suppliers of "air-less and grease-less machines"?
Electronics Forum | Tue Sep 19 14:52:40 EDT 2006 | bobpan
Grease every 2-6 months depending on the hours used. Dont overgrease.....and make sure you wipe off all excess grease after lubing because the grease always tends to get into the horseshoe sensors and then you will get motor error 4's untill you die!
Electronics Forum | Thu Mar 05 19:44:08 EST 2020 | portersmt
Hello, Was hoping to hear from fellow users of the Samsung/Hanwha SM4xx series. We currently have an SM482 and we were hoping to do some much need maintenance on it. Specifically, we are wanting to clean and grease the X & Y LM rails and Ball Screw
