Electronics Forum | Mon May 16 15:22:54 EDT 2005 | Fred N
the company i work for is going into circuit boards and want to find a used wave solder machine theyre budget is 10 to 20 k i have never run one of these machines and dont no what to look for anybody out there have recommendations of what i
Electronics Forum | Wed Dec 17 04:22:10 EST 2008 | bing007
The supervisor password is set and the current password is not known. I need to reset this. Is there a top level password above the supervisor level that can be input to enable me to access the machine data without clearing all the machine data out?
Electronics Forum | Wed Oct 24 07:55:06 EDT 2007 | rgduval
Daniel, We'd recommend MyData's as good low foot print, short quantity machines. They have a good level of flexibility for the price and operation. Considering what you've described, an older used TP9 would suit you. I'll caution you, though, tha
Electronics Forum | Wed Apr 01 11:24:24 EST 1998 | niall hayes
Hello, We are currently trying to design and ultimately implement a system that will be able to count and manage component placement for three Sanyo chipshooters on three SMT lines. As the number of components decreases in the reels we want to be ab
Electronics Forum | Mon Sep 21 21:57:17 EDT 1998 | Yuen
How can I solve the small solder ball in the N2 W/S ? The Oxygen level is 10000~20000ppm & no-clean flux.
Electronics Forum | Fri Sep 11 12:08:10 EDT 2015 | derrikf
I built one using an old Asymtek Automove. When all was said and done, it cost less than $400, including what was paid for the machine itself. It's a very basic setup, (air over syringe), but for our needs it does everything and more. With air to syr
Electronics Forum | Tue Jun 07 02:53:01 EDT 2005 | Base
Nope, not using it, but have some experience with it. Reliable, versatile, accurate. It is not in a league of its own, but it does everything you want it to at a level you expect it to. Never let me down. It is pretty much like a Toyota family car.
Electronics Forum | Mon May 16 18:03:30 EDT 2005 | davef
Key Issue: Will this machine solder your boards? You never know until you solder one. Any other avenues of analysis involve substantial risk. Flux Selection * High or low solids * VOC or VOC-free Solder Alloy * If using lead-free, avoid stainles
Electronics Forum | Tue Sep 22 12:58:18 EDT 1998 | Chyrs
| How can I solve the small solder ball in the N2 W/S ? | The Oxygen level is 10000~20000ppm & no-clean flux. Yuen, Sorry I an't got an answer, just more questions. 1-2% O2 in your wave solder - are you running membrane generated nitrogen? I don't
Electronics Forum | Fri Jan 14 05:34:03 EST 2011 | marusha
in my opinion - Fuji - the best choice. Assembleon and Siplace torment you with their software) These machines - a lower level.
.gif)
