Electronics Forum | Thu Sep 29 05:37:56 EDT 2005 | dougs
for 0402's you should be able to run the turret at full speed, if you need to slow it down it means that your machine isn't set up properly. use the vision number that the manual tells you and make sure your feeders are properly calibrated, poorly c
Electronics Forum | Fri Jul 09 23:45:22 EDT 2010 | dman97
I have a CP642 machine that always gives me a Station 17 or Station 19 nozzle error when the machine selects the 2.5mm 3.7mm or 5.0mm nozzles. It always throws an unknown nozzle station 17 error after all the heads have switched to the above mention
Electronics Forum | Fri Oct 01 06:45:36 EDT 1999 | JAX
| Hi, | | We are running 0402 component on the TCM1000 and we find that teher will be missalignment on 0402 Capositor. We have identified that the missalignment is caused by the wrong information from the vision system while doing vision centering.
Electronics Forum | Fri Oct 01 07:25:05 EDT 1999 | Wolfgang Busko
| | Hi, | | | | We are running 0402 component on the TCM1000 and we find that teher will be missalignment on 0402 Capositor. We have identified that the missalignment is caused by the wrong information from the vision system while doing vision cente
Electronics Forum | Tue Jan 06 08:05:33 EST 2004 | stefwitt
The manual is a bit more specific: Connections and Energy Requirements Specification for the Compressed Air For the compressed air supplied for the automatic placement systems HS-180 (adhesive application station as well as placement station) and SP
| 1 |
.gif)
winsouce.jpg)