Electronics Forum | Fri Sep 14 19:55:06 EDT 2018 | amartineck
I have a GSM1 that when try to zero it, it stops with the "Timeout waiting for spindle up" message. To get thsi up and running, I have set all my machine settings to default and had to reselect the head from a C4 1 head to the flex head. I initially
Electronics Forum | Tue Oct 10 15:14:43 EDT 2006 | mfoster
Hi Phil, Most parts are still available for the Quad/Samsung QSA-30, through Dynatech (in North America). It is actually a single gantry, 3 spindle machine with rated speed of 14,000 cph. As with any used machine, it could be a great deal or a not
Electronics Forum | Tue Sep 03 09:57:05 EDT 2024 | poly
What other machines have they got? I've got a gc30, gx37 and gc11. The lightning head has a much more limited height range than the 7 spindle or 4 spindle heads. You can't pick off trays with the lightning either. The GC60 / GC120 are amazing for
Electronics Forum | Sat Oct 10 16:05:27 EDT 2009 | dilogic
I would if someone can share his "real-life" experience with FlexJet (7-spindle) heads. We are currently running machines with Flex heads (4-spindle), which are very easy to maintain, but I suppose 7-spindle has more throughput. All comments are welc
Electronics Forum | Mon Jul 18 21:36:18 EDT 2022 | ttheis
We have two GSM machines (4-spindle, single beam) and had a camera fail on one machine. We decided to clean and calibrate the cameras on both machines. One machine we had no problems and all is working properly. The other machine will not pick up the
Electronics Forum | Mon Aug 01 10:31:34 EDT 2022 | spoiltforchoice
I'm not familiar with the machine, but isn't a KE760L an old slow "single head, single gantry" two spindle machine? Any speedup from simultaneous picking would not necessarily be that much of an improvement. Setup as you described is the way I would
Electronics Forum | Thu Mar 20 11:30:58 EDT 2014 | dave222
Hello Again. I little more information about the issue: when trying to zero machine head the spindles move up and down about 6 times before giving the error code. also I notice that all the LEDs on the circuit board are off. L11 - L18. and the nume
Electronics Forum | Tue Jun 28 11:45:27 EDT 2011 | jax
I have multiple machines consisting of a mix of the following: Single beam Lightning head machines (Advantis, Lead Screw) Dual Beam Seven Spindle machines (Genesis, Linear Drive) Single Beam Seven Spindle Machines Advantis, Lead Screw) The vintage ra
Electronics Forum | Sun Apr 30 20:52:33 EDT 2023 | poly
I've got access to all the manuals. Alas my 7 spindle head (flexjet 3 on a gx11s) detects collisions when picking even when no nozzle is in the spindles and they aren't near anything. My other machine is working well.
Electronics Forum | Fri Sep 01 10:08:08 EDT 2006 | dmascare
The machines I have been looking at range from about $13K to about as high as $30K. These numbers reflect a complete system with all the various sound enclosures, vacuum systems, starter kits etc. Right now I am looking at 60K rpm spindle machines
