Electronics Forum | Tue May 02 13:29:13 EDT 2000 | Stefan Witte
Hallo Erhard, this appears to be a common task for the manufacturer of taping machines. These machines pick from a bowl feeder or from a wafer and place into tape or tray. Check Ismeca, Viking and others. If you are looking into a custom made solutio
Electronics Forum | Thu Apr 27 10:26:41 EDT 2000 | Ron Costa
Hello all! I am looking for an xray machine that can show me an open BGA solder joint. Does anybody have any experience with different type machines? I have used Nicolet model NXR 1400i.It's good at showing shorts but it cannot show me an open. Any
Electronics Forum | Mon Nov 13 08:20:06 EST 2000 | Peter Loten
I agree with all the previous comments. You need an XRay system with good software capabilities to "clean up" the images, but you also need to interperate the results and training/experience comes into this. Get free trials first on a machine like CR
Electronics Forum | Thu Apr 27 08:20:14 EDT 2000 | obrienk
When I look at most placement machine supplier's web sites, I only see the placement machines. I don't see any info on printers, ovens, board handling, etc.? If Philips, for example, were to put together a solution for me, how do they handle those
Electronics Forum | Wed Mar 29 18:17:16 EST 2000 | David
Does anybody out there have experience building electronics assemblies with DCA (Direct Chip Attach - bare die onto PCB) and wire bonding? - What Die Bonder/Dispensing Machines are recommended? - What brand conductive epoxy were used to attach die?
Electronics Forum | Thu Apr 20 08:50:58 EDT 2000 | Mike Keogh
Ref.message from Chris McDonald,CORRECTION... VTECH SMT LTD. of Stirling, Scotland are an award winning supplier to major 'Blue Chip' companies and should in no way be confused with V-Tek inc. as intimated in chris's message. To date we have never su
Electronics Forum | Thu Oct 11 13:37:35 EDT 2001 | Stefan
The pressure sensitive tape is used as an alternative to heat sealed cover tape. It works usually quite well and is easily applied by the taping machine, but it can create some problems in the tape feeder. In the Surftape, Cal is referring to, the c
Electronics Forum | Fri Mar 03 10:45:10 EST 2000 | PAI
We are dealing with a unique machine that is having a couple of problems that we are trying to fix. A component code error appears whenever editing is done to any part of the program, array, or component library. This error we believe is causing t
Electronics Forum | Thu Feb 24 16:35:02 EST 2000 | D Scott
Larry, I have seen this problem on our IP-3 also. You can recover from this without powering down by going into the I/O page and turning off that particular function. The machine should be fine once you exit out of the I/O page. It almost acts like
Electronics Forum | Tue Feb 06 10:55:58 EST 2001 | pjc
Larry, Our specification is 0.075% for our Fuji CP3 and IP2 machines. At or above that figure the Maintenance Dept. has to get to work. We typically see 0.03% to 0.05% on average. The Fuji machines are all vision centering. We have found feeders are
.jpg)
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477
