Electronics Forum | Tue Mar 17 10:15:27 EDT 2015 | dyoungquist
What model of magazine are they? Are they the older black "TM" magazines or the newer "M" or "LM" models? On "TM" magazines, if the upper tape collecting reels are not turning for every slot in the magazine, the belt that drives the tape collection
Electronics Forum | Tue Apr 12 11:55:06 EDT 2022 | ilavu
We have one JOT magazine loader and PLC died on it. I contacted JOT multiple time to get replacement PLC or backup of PLC and no answer from their support. I have same model of PLC but I dont have PLC program backup. Can anyone here help me who have
Electronics Forum | Fri Mar 16 17:39:23 EST 2001 | davef
A good starting point for you is http://www.smtinfocus.com/printing.html
Electronics Forum | Fri Mar 16 13:33:21 EST 2001 | gdstanton
Anyone out there have a real good stencil printing process control document for an MPM Corporation stencil printer model # SPM? We are seeing lots of bridging, wetting, and filling problems. Thanks in advance for your help.
Electronics Forum | Sat Mar 17 15:12:33 EST 2001 | robhal
First thing to check is that you have a good gasket between the PCB and the stencil (if not check that the tactile is free of paste at the base of it and calibrate the tactile. I am assuming it is not a head mounted tactile) Also check that the wipe
Electronics Forum | Thu Mar 10 10:35:39 EST 2022 | paddymanoj
I have a used MYDATA Pick & Place Machine. It is MY9 and year 2000 Model (almost 22 years old). I have 5 extra magazines of this Machine (MY9). I want to know, if I can use these Magazines with any other latest MYDATA model. If someone can tell me, w
Electronics Forum | Tue Apr 24 08:31:36 EDT 2001 | davef
First, you found THE place already!!! Read the Archives, current and previous Newsletters, technical papers, terms & definitions, etc Second, magazines ... Assembly magazines http://smt.pennnet.com/home.cfm http://www.cassembly.com/ http://www.ep
Electronics Forum | Tue Oct 16 09:17:10 EDT 2001 | davef
Look at "Microcanyons", Circuits Assembly magazine, December 1998. There D Pauls & T Munson describe adhesive on boards that was cured too rapidly and formed a skin that trapped volatiles and solvents. The volatiles and solvents created long voids i
Electronics Forum | Wed Feb 24 12:41:05 EST 2021 | ilavu
I am looking for a PLC program for JOT213 magazine loader. The PLC unit in the machine is Omron CQM CPU21. If anyone have similar model and can share PLC backup.
Electronics Forum | Mon Jan 29 20:31:44 EST 2001 | davef
It's common. We've talked about it here several times. Hopefully the fine SMTnet Archive that are available are helpful. If there not talk back. Other sites that are sources of information are: * SMT Magazine * Bob Willis * Phil Zarrow * Amp[c
