Electronics Forum | Wed Mar 27 08:07:42 EST 2002 | caldon
Ovation Products (devision of Airline Hydraulics) makes a fixture just for Screen printing and PNP machines. This product is called grid lock. It's tooling that is air actuated and conforms to the bottom side of your PCB with gentle (gentle enough no
Electronics Forum | Wed Aug 29 13:43:27 EDT 2012 | icin
Thanks to all of you that have replied and those that may eventually reply. We are feeling better now that you experts with many years of experience have not indicated that this is as common as ESD or Moisture Sensitivity Awareness to the point that
Electronics Forum | Thu Jul 10 13:24:59 EDT 2014 | sargeredarmy01
Ok so here is where I am with everything. I pulled the cylinder and cleaned it out. Didn't find anything out of the ordinary inside. I set everything back up and tested it. Still nothing. I went into the I/O map and tracked down that input, I then
Electronics Forum | Mon May 14 15:20:35 EDT 2001 | stefwitt
You can make up a plate over lapping the tape exit guide and to the right up to the nozzle changer. It should hold three standard size Jedec trays. I used the bases of two old vibratory feeder. No matter what you do, you should use strong magnets to
Electronics Forum | Mon Jul 30 10:32:46 EDT 2001 | hinerman
There are three types of tooling, on a continuous scale a. Manual b. Semi-Automatic c. Automatic An example of a manual system is magnetic pins or a setup where pins drop into a fixed grid. Semiauto would be a system that automatically sets the t
Electronics Forum | Wed Jan 21 10:35:14 EST 2004 | J Smithj
We have not checked the storage plate yet. I did send an email out to a couple of our other plants and discovered they too are seeing problems. The storage plate has come up in disscussions here. Since you mention it as well I think we should take a
Electronics Forum | Thu Jun 03 14:12:25 EDT 2004 | russ
Thanks Rob, $7k, for a bag of silly putty with a magnet! This is supposed to be the same cost as tooling pins and much cheaper than dedicated tooling? I can't remember ever spending 7k on tooling unless I had 20 unique plates made. I wonder how ma
Electronics Forum | Tue Jul 13 14:47:35 EDT 2004 | cyber_wolf
I have a brand new X/Y/Theta table for an SPM(The one that uses magnetic supports) that I would like to trade for an older version table.(The one that has holes drilled and tapped in it.) the one I trade for has to be in good condition. No stripped h
Electronics Forum | Thu Mar 31 19:52:50 EST 2005 | davef
We agree with Russ that you're talking palladium instead of platinum. Your wetting problem likely is not the Pd-Ag surface layers, but the underlying metal or nickel to which you need to wet. Either a base metal is: * Contaminated and poorly wettabl
Electronics Forum | Mon Apr 18 09:52:36 EDT 2005 | pjc
FormFlex and the GridLok system will not work on a semi-automatic printer. They were designed for fully automatic machines. The print table is very shallow on the DEK 248, SMTechs and MPM SPM, UP100 and MicroFlex. DEK should have magnetic base suppor
