Electronics Forum | Thu Jan 17 18:29:01 EST 2002 | Bill Loving
Dear Jason, Thank you for posting your request on SMTNET. Please note that ScanCAD International provides an upgrade path for all installed customers, regardless of the age of their system. Currently, hundreds of systems are installed in 37 countr
Electronics Forum | Thu Jan 17 18:33:24 EST 2002 | Bill Loving
Dear Jason, Thank you for posting your request on SMTNET. Please note that ScanCAD International provides an upgrade path for all installed customers, regardless of the age of their system. Currently, hundreds of systems are installed in 37 countr
Electronics Forum | Thu Feb 07 20:53:51 EST 2002 | davef
Regardless of the technique used for the mounting pad shape or definition, isolation of the plated through hole [PTH] from the mounting pad is important. If the PTH is contained within the mounting pad, solder will wick down the PTH. The amount of
Electronics Forum | Wed Mar 06 17:15:06 EST 2002 | djarvis
Hmmmm, very good point. I never thought about it much as such dedicated tools were not available when I first kicked off. I'd look at the reflow under a microscope and if I could identify any problems, I'd start to look at the print using the same
Electronics Forum | Mon Mar 04 17:52:59 EST 2002 | davef
Yes, providing the surface of the via is solderable. * If so, how much paste? => Vias come in various sizes. Boards vary in thickness. So, the amount of paste to fill a via varies. Roughly, you�ll need twice as much paste as the volume of the via
Electronics Forum | Wed Mar 06 21:16:17 EST 2002 | davef
�What does 5 micrograms of chloride mean to me?� * With SIR testing, you can show no detrimental leakage currents under humid conditions, no corrosion, no metal migration, which are the big factors in figuring out electrochemical reliability. People
Electronics Forum | Thu Mar 07 09:03:03 EST 2002 | cabjerk
After the IP3 is stopped by any means ie. Estop, cycle stop, or machine runs out of parts, upon restart the table will go to load position, unclamp, reclamp, read the fids and then proceed as normal. The problem is that if we already have fine pitch
Electronics Forum | Fri Mar 15 17:00:56 EST 2002 | stefwitt
Steve, let me add a more lengthy note on the current service situation, which does not apply for Assembleon alone. I think it was April last year when Nokia re-adjusted their growth rate from 40 % to 10 %. Followed by Motorola�s massive lay off and p
Electronics Forum | Wed Mar 20 11:46:20 EST 2002 | slthomas
How about we all try real hard to come back to the forum and post what we eventually found was the resolution to the problem we started the thread for in the first place. I'm probably guilty too, and I'm gonna try real hard to practice what I preach
Electronics Forum | Thu Mar 21 08:29:27 EST 2002 | PeteC
Don't forget Mydata, the Swedes that dominate the lower end and flex placement market now. Yeah, many bought the Omni from old UIC but what did they develop? "Support", the equip mfg?s are suppose to support the customer. UIC got a lot of good constr
