Electronics Forum | Thu Dec 17 15:02:55 EST 2009 | jlawson
Valors vPlan also has applicable valid tools - smt programming ,docs/WI generation, manual placement all possible...
Electronics Forum | Tue Jun 08 08:32:47 EDT 2010 | deltaservices
Hello Nguyen, You calibrated the Eclipse (with glass components I gues, on the glass PCB. After that you have to run the Chip calibration that calibrates the laser offset. You can also manually put in a laser ofset but this is not so accurate.
Electronics Forum | Tue Jun 08 08:32:54 EDT 2010 | deltaservices
Hello Nguyen, You calibrated the Eclipse (with glass components I gues, on the glass PCB. After that you have to run the Chip calibration that calibrates the laser offset. You can also manually put in a laser ofset but this is not so accurate.
Electronics Forum | Fri Jan 29 02:59:02 EST 2010 | szsummersun
hi peter, i have experience with manual soldering iron using automated wire feed,please email to me about it in detail,thank you.email:steven@ludeecircuits.com
Electronics Forum | Thu Jan 14 06:27:50 EST 2010 | bobpan
Hello, Havent done them on this machine for 15 years but the manual i have says to go to the teach menu....answer yes/no to local fids taught by autoprogram. If no....enter feeder number and place number then teach. Bob
Electronics Forum | Tue Feb 09 12:15:14 EST 2010 | rajtaware
Check if the feeder position is out of picking area mentioned in manual. Change the feeder position.
Electronics Forum | Fri Feb 12 02:49:12 EST 2010 | smellew
CC if this works good, MCS & F4G cables are different also different to the Host cable i gave you before. do you have setup manuals? regards llew
Electronics Forum | Mon Mar 01 11:56:51 EST 2010 | pjc
Your IPC-610 workmanship manual will have the answer for you (I don't have the latest at my fingertips). Depends on what class you are building too, 1, 2 or 3 and the application of this connector on the product- which you must determine.
Electronics Forum | Tue Mar 30 06:27:22 EDT 2010 | ristikas
It happens on the middle of the stecil cleaning. The camera and the cleaner will stay under stencil in half way back. Then machine asking the initate the motors. If to press initate then the pcb stopper will hit the rails. Usually we move camera and
Electronics Forum | Fri Aug 06 06:58:20 EDT 2010 | mun4o
Hi, i have manual for hotflow 5, but I am in holiday.I will in company at 01.09 and can scanning the document and send you .Is it OK for you?
winsouce.jpg)
