Electronics Forum | Fri Dec 13 17:27:25 EST 2013 | comatose
We have a 2006 MPM Accuflex that we purchased used last year. We did not get a maintenance manual with it, and MPM wants $9500 to register it before they'll send us one. Does anyone have manual they can sell me for this? it stopped initializing and
Electronics Forum | Mon Jan 07 08:23:37 EST 2013 | cyber_wolf
You should be able to find this in the utilities menu under calibrate machine. (If your software is the same as my Momentum) If not, give MPM service a ring. They will help you.
Electronics Forum | Fri Apr 26 08:04:59 EDT 2019 | griinder
We solved the issue. A stencil must be clamped in the machine to allow the command. The stencil serves to hold the board level, while the pins are set. The machine is smarter than us.... :/
Electronics Forum | Thu Mar 04 22:45:03 EST 2021 | tomek_k
Hi Mam do Momentum. Myślę, że jest bardzo zbliżony. Jeżeli cię to interesuje mogę wysłać. Pozdrawiam Tomek
Electronics Forum | Tue Jul 18 11:55:55 EDT 2023 | cyber_wolf
As I said, the intent of the "stepped" feature is to aid in paste release. Continuous is normal mode. I believe the manual explains these features in depth.
Electronics Forum | Wed Apr 24 13:49:19 EDT 2019 | griinder
I have a support question concerning setting the gridlock tooling in manual mode on a MPM Momentum Elite. I am printing the top side (bottom is populated with parts) of a thin, flimsy PCB. The Grid lock tooling bows the PCB upwards in Auto mode, beca
Electronics Forum | Fri Jan 04 13:47:00 EST 2013 | cyber_wolf
If its the same as a Momentum then no you do not need to use jigs. There is a "global offset" field that allows you to add background offsets. The glass plate jig calibration procedure only needs to be used after a major crash or if you feel the need
Electronics Forum | Wed Apr 24 21:33:02 EDT 2019 | pcbindex1
With the upcoming of the traditional peak season(Q3), a rising price among the mainland factories, and a continual rise in the bronze price in the London Metal Exchange in August, there is also a trend for the rise in the quotation of the PCB’s upstr
Electronics Forum | Fri Mar 29 16:57:07 EDT 2013 | aemery
Gentlemen, Just became a member and scanning the old posts hoping to help people out with their MPM printers. Most of this info is correct, the last post was the best. Offsets on an Accuflex printer can be put in either per process program or glob
Electronics Forum | Wed Mar 07 13:58:06 EST 2018 | griinder
We are using Gerber EZ Teach to inspect near 100% of some boards. Many component footprints seem to be assigned custom packages. These custom packages come up as "preview errors" during inspection. I have noticed when I manually move the camera to th
.png)
